Headliner for mic placement on '18 Tacoma TRD Sport

Hi all,
I'm looking to place a Bluetooth mic for a new Kenwood HU install in the overhead console of my truck. By that I mean I'd like to clip the mic onto the overhead console and run the wire across to and down the A-pillar and back across under the dash into the radio. It looks like I have two routes to the A-pillar: 1. Across the headliner, and 2. Out to the headliner (a much shorter distance) and across. Is it possible to fish the mic wire across the headliner from the overhead console opening? Is it also possible to push the plug end of the mic wire through the headliner and then run it across the front of the headliner without permanently messing it up? Has anyone done either of these methods to locate an aftermarket bluetooth mic? I dont want to clip it onto the A-pillar or behind the steering wheel. I haven't had good results with those placements in the past in other vehicles. Thanks!