What Have You Done To Your 3rd Gen Today?

Very Nice Zim!

BTW, don't pull those zip ties too tight. If you ever want to add a wire, and could otherwise just snake it through the existing loom, an overly tight zip tie could prevent it.
Hopefully, the ones that might be the hinderance are easily accessible and thus easily replaceable.

Still nice though.

 

thanks

thnks..... I really want access to the power from the cigarette lighte/power socket and maybe the blank....

 

How did you mount that compressor?

 

I put in my Spotter mirrors today. They seem to do what they say they do as far as field of view. In the passenger side pic, the rake you see was set up right in the middle of and two feet away from the rear doors.

Will take time to learn to ignore the little blind spot mirrors when using them just for rearview though.

 

+1 hp... Luminous ignition switch decal

 

Finally got to finish up my Gas Hole and Door handle covers.

Is the gas hole a little rough to get the cap in? Mine seemed a bit tight but not sure. I can make it work.

 

Or... you could just turn off your headlights when in reverse. Works great for me and it's free.

 

Genius!

 

I am trying to find an ignition switched power and dash illumination circuit(s) on the passenger side near the footwell. I believe the power window switch circuits will do the trick but I am having a bear of a time finding the proper wires in this harness. I’m a couple hours deep now with a multimeter and no luck. Before I spend more time on the floor with the multimeter thought I’d post here to see if anyone has previously found such wires in this location. The three clips at the top of this photo are the only wires running into the passenger door.

 

Find the illumination wires in the door switch panel and trace back.

 

Damn, thats way longer than I thought it did

 

That would drive me crazy having to do that every time

I’m lazy and don’t want to

I like mods

it’s just cool

 

Finally had a warm enough day to throw some paint on it

 

I just came across this online. It was quite the set for $80

 

Mine was tight too. Hit it with a little sandpaper and it’ll loosen up.

 

Thanks - I have a C4-C7 neck fusion so I need all the help I can get.

 

I thought of the exact same thing after remembering that show about Philly Parking Cops.

 

Pretty sure you just sold me on that bumper, man that looks clean and low profile.

 

If I had a dollar for every woman that found me un-attractive.... Eventually one of them would find me attractive.

 

Finally got the HC rear bumper on by @outgearsolutions (IG), very stoked on it