Wheelspacers and towing 3rd gen

I haven’t found a thread with these two words together.

Main objective is to increase width of my tires as I am running open country toyo atii 255/85/17 pizza cutters. But want to make them further out to at least flush with my wheel well. But I also tow! 5k lbs. with my reasearch so far, for sure hub centric wheelspacers 1.25” is enough. So many on Amazon/market. What should I look for to meet my needs?

 

Just get spidertrax or bora and you’re set from what I read around here. If it was me , I would rock it but I wouldn’t tow with it . Just too much things that could go wrong.

 

If everything is done correctly, I'm not sure why towing with hubcentric wheel spacers (reputable like spidertrax) would be any different than towing with negative offset wheels.

Edit: Here's an F150 thread - https://www.f150forum.com/f38/safe-use-wheel-spacers-when-carrying-heavy-load-pulling-trailer-255808/#:~:text=Using wheel spacers is safe,and not the wheel studs.

And a GMC truck thread - https://www.gmfullsize.com/threads/towing-with-wheel-spacers.298519/

 

Get Spidertrax spacers, the overall best from what i've heard. Been running them for 6 months or so now, often carrying heavy loads in the bed/occasional towing.