3rd gens with aftermarket wheels & NO LIFT

2020 stock Sport TRD 4x4 265/70/17 Ko2’s on 4Runner wheels

 

Relations Race Wheels RR5-S 16x8 -12 Matte Bronze
BFGoodrich KO2 265/75/r16 All-Terrain tires

No rubbing or trimming
No lift/level
~1 inch of poke





Update: I had a 1.5 inch lift installed in early March 2021

 

The truck is sick...the s2k in the back looks like a fun alternative for when you aren't feeling the off road. Love both!

 

Thanks!
The S2000 was my mother in laws. We just recently inherited it as she cant drive it anymore- has alzheimers
But its mint. She bought it new and aside from performance exhaust and Supperleggera rims, it’s 100% stock unmolested, babied

 

Sorry to hear that about your MIL. My wife's grandmother has it as well so I understand.

You have a unicorn in your possession though!

 

Okay, I’ll play. Fifteen52 Turbomac HD Classic, 17x8.5 / et0 / 4.75” bs with 265/70/17.
Soon to have OME 2” lift w/ SPCs and 285/70/17 wildpeaks, ordering the lift today

 

265/70/17 ko2’s on ray10s -10 offset 17x8.5

 

American Racing AR202 Black/Matte Bronze. 18x9 0mm

Cooper Discoverer AT3 PMS 265/65R18

 

Nice!!!!
No rub?

 

What kind of tires do you have on it now? Are they H/Ts?

 

Tires are some no-name (Travelstar?) all terrains that came on the wheels when I bought them second hand. I ran 285/75/16 wildpeaks on my last truck and was really impressed, so I’m going to run the same on this one

 

very little on the passenger side front liner, some heat molding should take care of it.

 

How do you like the height and how's the ride? I'm getting some installed and trying to find some info on them before I pull the plug.

 

Where and tire size?

 

can you elaborate on what you heated and pushed back to clear the 285's? i'd be super appreciative of pics of what you did/with good detail so i can achieve the same thing. I have no lift in rear, but i leveled the front with my Falcon/Teraflex sport leveling shocks i installed. I also put on new upper control arms so i'm hoping i'll clear no problems in future

 

285s on my pro. Cut the mud flaps where I had slight rubbing on full lock when they were stuffed. Cropped pic has 265s on top vs 285s on bottom. I got tired of all the mud up the sides of the truck with no flaps so threw em back on. Love the look and performance of 285s. No rubbing on inner liner wells or uca.

 

I have an SR5. Will I be able to clear a 265/70/17 with no lift? (0 offset wheel) I see them on all the TRDs in this thread, wasn't sure if the same would work for us SR5 guys.

 

I don't have an SR5 so I can't speak on experience but chances are you will fit those fine. Double check your offset, make sure they're not too much negative offset.