San Diego BS Thread.

My wife and I went into the San Marcos one a couple weeks ago to price appliances and were shocked at how empty the place was... Just a couple years ago it was full and vibrant!

 

Murphy Canyon, San Marcos, or both?

 

ALL

https://www.wpxi.com/news/trending/...stores-nationwide/AKTOZ63IVJF65AQYUITB732KIU/

 

Damn really? Used to love going there when I was little

 

I remember my sisters boyfriend at the time who worked at fry's, purchased and snuck out a PS2 for me on release day. Times have changed for sure.

 

Who is it?

All jokes aside, I thought no one should get a fine for being this good.

https://www.kusi.com/california-man-cited-after-using-mannequin-for-carpool-lane/

 

That's an old trick, but that's the best manaquin I've seen used.

 

Yup, most people rock these
https://www.amazon.com/Forum-Novelt...eywords=inflatable+doll&qid=1614756944&sr=8-3

 

Any runs coming up?

 

https://www.instagram.com/reel/CMDhqMvn1r1/?igshid=l207enoa4zlj

 

This month on Amazon Prime, see The Last Mission which features three 4x4 Toyotas and one Jeep driving the road to Mission Santa María in Baja California... and I added some historical comments. 20 minutes, no commercials: https://www.amazon.com/gp/video/detail/B08W8G7ZNC/

 

Wow that thing is creepy! "Hunk"

 

Damnit! The user profile doesn't exist! Was looking forward to seeing more sketchy shit!

 

https://youtu.be/SMR4KF_g0VI
For people that can't see it

 

Thanks I meant that the @yotergang69 account didn't exist on instagram, probably just tik tok and I don't do tik tok..

 

Yip got it. I read your comment wrong lol. But ya, after I edited my post I figured I would move it to my youtube so everyone can enjoy some sketchy shit

 

Just happened to look at the Amazon suggestions based on discussions in this thread and wondered who was talking about the blow up doll

 

Haha, I was about to post the same screenshot

 

Selling my Solo Motorsports +2 kit complete as is with axles and gusseted spindles for $3500 OBO

Pricing feels fair like buying a kit and getting built axles, a spare axle shaft and gusseted spindles for free...

Kit Includes :

• +2 uppers and lowers powder coated silver vein
• OE lower ball joint adapters powder coated silver vein with 10mm spacer and 10mm longer spindle bolts
• TC gusseted spindles powder coated silver vein
• TC +2 axles powder coated silver vein with new cv boots
• 1 extra +2 spare axle so you can build up a trail spare
• Crown Performance extended brake lines to run replace everything from the the frame to the caliper ( you will need your own bajo bolts )
• +2 Tie Rod extensions

The Bad :

• Powder coat is a few years old there are some chips in it and some dumbass ...cough...me...cough may have got a bunch of brake clean on the lowers which you can see in the photo
• The inner bypass tab was cut off to clear my big brake caliper, you could fully remove it and grind it smooth or add it back on easily if you are going to run a bypass. The remaining bypass tab is a perfect place to strap too.
• One of the brake lines has a cut in the clear cosmetic shielding only, does not affect performance.
• LCA bushings need to be replaced, just the usual wear and tear cheap and easy to replace.

What you will need :

• Standard 8" CO, kit was designed around a King CO.
• Staps and clevis'
• LCA bushings
• Bajo bolts for the calipers

Here is what the kit looks like installed with OE brakes :

 

Lol, I think it had something to do with the car pool lane.