What Have You Done To Your 3rd Gen Today?

And looks like I can get it in aluminum for about the same price as the body armor one too. MN is not kind to aftermarket bumpers, skid plates and bed racks... even powder coated ones rust up pretty fast.

 

Looks like it was a day for molle panels! Actually bought these for Black Friday last year and just got around to mounting them as they don’t fit quite as well as I’d like since they are multi gen (but I was told they’d fit 3rd gen no problem ), and the hardware that came with it didn’t end up being the right size. Might try to color match better when I get a chance to see what Home Depot has....

 

Started the License plate light Disable while In Reverse. https://tinyurl.com/ycxj2m7m Fellow came by to buy my DD commuter. Fellow checks car while I undo DIR package. Fellow goes for a spin. I manage to undo light and attach 2 parts of harness. Fellow comes back. We dicker and do paperwork. 90 minutes have passed since I started the DIR project. Fellow leaves, I register sale online, and head downstairs to garage. I back the truck into the garage to work below with some light as the sun has now set. Honey, supper's ready. Birthday supper for youngest, she's 17 today. I took 1033 photos earlier today of her and her fellow players at a volleyball game. Get to sort those later. Anyway, supper with the family, gifts, and time to head back out to the garage. It's now 5 hours after I started. I finish install and clean up.

Next I completed my new tool roll. The back of tools I'd brought from my 1968 Chev had no metric, no ratchets, no sockets, not much of anything useful on the Toyota. (Need a coil anyone?) So, went to @turbobod 's gear roundup and followed his recommendation. https://tinyurl.com/yac9yqqx

It begins to rain. I check my Scepter Water can for my new wrench. Oops, bought the MFC wrench for the jerry jug, not the water wrench. Honey, are you ready to put the cars back in? No, I mean, yes.

Cars in, things locked up. I come in at 9 pm. It took 6 hours for 2 projects that take 20-30 minutes to assemble, install, and test. But right now, lava cake awaits me. (Oh, it was good!)

Ditch lights await me on the morrow.

 

Can’t say how well they would hold up to automated washes but lint loves to stick to it. What about these?

https://www.ebay.com/itm/Rear-Bumpe...et-Pair-Toyota-Tacoma-2016-2020-/324028144618

 

That was quite a story well told

 

If anyone has a retrax tonneau cover, would you mind showing me where you put your drain tubes? I have a feeling I’m going to have to drill out the holes near the cab to fit the tubes and not sure if there’s a better option available or if that’s something that I shouldn’t do.

 

All I had to do was an oil change before a long trip tomorrow. Had to drop the skid plates first. Then wile I was still under, I put a one gallon bottle under the fumoto valve with a short tube attached. It was draining slow, so I went to look for my filters. Not where I left them... Hmm, the hunt begins. But I completely forgot I was currently draining oil. When I finally found the filters, my gallon jug was full and about another quart was pooled in my driveway. FML! Now after midnight I’m finally finished cleaning up.

 

Found this when searching, seems some people do. Just be careful if you do and seal any raw metal.

EDIT: just saw you are long bed

 

I was about to head over until I read that you've cleaned it up. Boy howdy do I know that routine. Time to call it a day.

 

Installed the Demon brackets and Autmatch shackles.

 

Under the hood is the only place I like chrome...I might look into a dry filter myself

 

Did you buy those from someone in Seattle? Could take a pic looking down on them please.

 

So, while I don't own these, and don't thi k they're the bees knees or anything like that, I am involved in industrial design, and manufacturing. While it really looks like a simple part, there are actually a significant amount of machine processes going on there. I know first hand, Cnc machining is not affordable within the states. Especially for smaller production runs needed by the smaller businesses. Not to mention that aluminum isn't affordable here either, and tooling consumption if machining steel doesn't make that very desirable either.

So while the price might not float your boat, it's pretty shitty to express an opinion in a way which seemingly devalues a product.

 

Hey everyone, what's clearance for tires on 2021 Double Cab TRD Off-road?

 

Just from an outsiders perspective, I don’t see his post as devaluing the product. Everyone has a limit they are willing to spend for a particular item, and the cost obviously exceeded what he was willing to spend. With that said, if he found them used for a lower price, he may buy them in an instant. I doubt anyone is basing their purchase decisions on one persons opinion that doesn’t actually own the product. I personally think many of the products I’ve seen are too expensive, but then again I am very cheap when it comes to buying various accessories. Just remember that everyone is entitled to their opinion, including yours, his and mine.

 

If any of y'all were on the fence about buying Spotter Mirrors, they are running a 10% off sale this weekend. It's not a whole lot, but it beats nothing. Seen here in this post by @TacoMike :

https://www.tacomaworld.com/threads/spotter-mirror.711048/

Code on the website is "W10R3521"

It took me a second to find where to put the code at on the site:

 

Welcome! 265-75-16

 

Looks great. Any rub happening?

 

Haven't yet. Waiting on a hole saw kit i ordered to arrive. I think I'm going to drill the front bed vertical wall near the floor, and run then through.