Yellow Lamin-x Installed

Weather was nice so finally put these on....only got one pic but think it looks a lot better, especially on a white truck. Install was easy.....took the trim rings off, cleaned the lights and installed dry. Took maybe 10 minutes for both sides. Decided to just leave my fogs as halogen for now. Did a 5K HID kit in the projectors and love it.

 

Those look great! And I have a set on order for my white OR and they should arrive any day now. How do you get those trim pieces off? Do they just pry out with one of those plastic trim tools or do I have to get at them from above or below?

PS: learned that this company is just up the road from my cabin in north Georgia. They are based out of Blairsville, GA. Nice little mountain town.

 

You should be able to pull them straight out but they do have clips from behind....if you look down below the headlights you will see them. Just pinch in on them if you get resistance. I just used my hands, no extra tools.

The Lamin-x I started in the middle and worked my way out from the center. Got them on smoothly forst try with no bubbles. I will try and get a night pic this evening to post.

 

I did the same on my pro fogs. Yellow on white and red, very nice.

 

We just did my buddies Silverado. He had factory LEDs and it had a very greenish look when they were on. Just throwing that out there. If you go the LED route you may want to really pay attention to the companies return policy- or even borrow a buddies bulbs just for a quick test run. My buddy ended up ripping the tint off within a day or so just due to that alone.

 

Color output would depend color of bulb. The pro fogs with yellow film is more on the yellow amber side

 

Here is the 5K HID in the projector with the yellow fogs. Not totally dark but this will give you a better idea.