For Stock Rigs Only

Oh my word no wonder the dash was shaking, this little bastard was in the blower spinning in circles LMAO

 

Like a hamster wheel!

 

Poor thing, just couldn’t keep up

 

Damn.

 

Oof. That'll cause a little imbalance issue

 

Just about any kind of grease will work. Hi temp bearing grease or marine grade grease are pretty good at staying put

 

That’s what she......nevermind.

 

Next time she needs to put 2 in there....same weight, directly across from one another. Perfect balance

 

She says I cross thread it too much.

 

@Sig45

Mark spray the threads with some of that Liquid Wrench rust inhibitor before installing. That's an option

 

Fresh air....

 

I use it behind rotor hats to prevent them from sticking to the hubs.

Also....those LCA bolts on the gen 1 Yaris that are notorious from for holding water and rotting out? A yearly lathering of antiseize has prevented that.

A few years ago I mark the alignment on the Taco and dissambled the LCA cams and bots and lathered them up with antiseize. After a couple of years I took them back apart and they came apart like butter.

A heavy grease would have probably netted similar results in those situations too, I'm sure.

 

Oh...good. I just hit that steering knuckle today when I was down in that area removing my skid plate.

 

Right?! I was gonna wait til this wknd to dismantle but the little voice told me to do it tonight before the next couple of warm days. Glad I did. Thing was a ticking time bomb.

 

She'd a smelled just lovely

 

Yeup

 

Normal

 

I saved it for you

 

Oh Boy..