4xinnovations internal cage install

but why? Asking that is like not taking the slack out of a chain when recovering a vehicle.

 

If you aren't running a 4 point, exocage. Any incident that the cage would be useful to protect the cabin it will be likely that you bounce heads off of it.

 

For sure! This is why companies make cool products to protect your noggin.

 

So this isn't a DD or do you plan on wearing a helmet when you drive to the grocery store?

 

I plan on foam wrapping the tubes inside for daily driving and helmets in the truck as well

 

Who did the work?

 

JD Fab out in CA. @81Trekker welded it up. It's buried in this thread. And to clarify, it's not my truck.

https://www.tacomaworld.com/threads/fitting-35’s-with-minimal-trimming-now-adding-long-travel-and-934-cv’s.626274/

 

Figured as much. I recognized the work. So clean

 

I’m 6’3 and built the silver truck around me. The only way for me to fit was cut all the interior sheet metal out and have the cage 100% tucked against the body

 

I always just used my lap belt when i was driving on the road, shoulder and submerine strap werent used unless racing

 

Too bad you live so far away from me Harry! But it’ll give me a good project to tackle this summer before ATR.

 

You can ship me your truck, you’re really not that far away considering we have had trucks from Dubai sent over