Any 2wd work daily/trucks

My 2019 tss 3 inch lift on 295s

 

2016 SR5- 3” lift, 1.25” wheel spacers, 285/75/17

Purchased brand new by me in 2015, other than a few layoffs at work it had been a daily driver ever since.

 

Check this daily driver. Had some fun last weekend.

 

What size wheels and offset? I'm running 285/75/17s too.

Any trimming right at this spot? Front driver behind the wheel. I need more beyond what was done. Rubs when i turn on an incline. No rubbing on flat roads.

 

Info on the wheels spacers my upper control arm rubbing on the 295s

 

Not sure if either of those is helpful. I did the same to both sides, Cab mount chop and then cut the metal part of the fender on an angle and zip tied the fender line to that.

My wheels are factory Toyota TSS, I believe 17x7 +18mm. My 1.25” spacers end up making the entire setup around -6mm I believe. I could definitely run a thinner spacer and it would clear better, something I will likely do in the future.

 

Info on your wheel size and offset?

Big wheel spacers can cause rubbing elsewhere while help clearing the UCA. Stock UCA?

 

1.25” would be a safe option, but as Sig said, it would make you rub in other places. With my 1.25” spacers and 285’s I have a lot of room between the tire and UCA.

 

I'm on 17x8.5 0 offset 4.75bs. Custom Bora .75" wheel spacers and have A LOT of room with JBA UCA and 285/75/17.

 

I have stock tss wheels might go with a 1.25 spacer I’m running 295s with no cab mount chop* only rubbing on stock uca