Tire Pressure and Traction Control light reset

Hey guys,

I have a 2nd gen Tacoma and I recently put some new Method wheels on the FIT Taco. Ever since the tire shop swapped my tire presure guages form the stock wheel to the Method wheels the tire pressure lght and traction control lights have been on. How can I reset them.

My appologies if there is already a thread on this.

 

VSC
https://www.tacomaworld.com/threads...ibrate-your-vsc-computer-the-easy-way.467485/

Or use Techstream.

TPMS
Done with the button below the steering wheel to the left. This procedure is in your manual.

 

I turned the truck on and held down that button. It turned off but came right back on. Maby I didn't do it right. I've been meaning to order a manuel. What would one do if they do no have a manual?

 

Set pressures. Key on. Hold button until light flashes 3 times. Drive.

If this fails to work the common issue is the shop damaged them during the new install of everything.

 

Awesone! Thank you for the info.

 

Does the light flash at first then go solid? That's usually an indicator of a bad tire pressure sensor.

 

It was trigger when the tire shop swapped the stems and put them in my new tires. I had them put the stockers back on and I drove it a few hudred miles with no sensors insalled the lift a week and a half later and then put the Methods on that have the sensor. This makes me think it just needs a reset. I'll try tomorrow.