What Have You Done To Your 3rd Gen Today?

Got the Toyota update I needed and the KDmax tune from @wahoobie. Truck is night and day difference now. Like driving a new truck. Excellent work @wahoobie!

 

It’s DV8 bumper, not cutting required.

 

Put my door emblems back on after paint matching them with my wheels and bed decal

 

yes sir that was us! Spent three days in San Juan del Cabo and quickly walked around Cabo’s harbor and Skedaddled - a bit to touristy for us.

we’re now near Guerro Negro and pulled a Policia Muncipale out of the sand. At least now we know we can camp here. No pics of them cause they didn’t want it

Just finished week 7 in Baja,, living the life, viva la vida!

 

Nice camo. For some reason, I'm thinking Oregon..

 

I was just talking about 3m's fluorescent yellow wrap in the Socal spotting thread yesterday and seriously pondering the idea of wrapping my truck in neon yellow. Love the neon green on the methods. Plasti Dip or powder coat?

 

Washed and waxed the other day, today while working on my kayak I decided to move my shovel mount over to the other side of the bed rack so I can put my paddle on it. Fits great! (BTW, im using a ATV gunrack as a shovel/paddle mount)

 

Had a hard time spotting the truck in the last picture - blends right in.

 

thanks guys! They’re powder coated, the bedsides are vinyl, and the door emblems are automotive paint. Need a little color pop to contrast the camo

 

Bad ass! The wheel color choice is top notch

 

Okay, finally got the RDJ Trucks Streamline flares on. Did one side, then had to go visit the Easter bunny, came back and finished the other side. Now that it's in the sunlight, the paint on these RDJ Flares is almost a shade brighter than the factory paint. Other people dont notice it but I do. I'm hoping with a few weeks in the sun, and some rain, it will even out and match a bit better. Also, there were some micro blemishes in the finish. If I could describe it, it looks like someone dropped a cheesecloth on the flare when the paint was wet. Barely noticeable, and not enough for me to ask for a refund or a redo from RDJ. They do offer a 3 year warranty on the paint, so if it continues to bother me, I may see what can be done.

Install was pretty straight forward. Factory flares are held on by some 10mm screws and double sided tape. The RDJ flares are 10mm screws, and a rubber gasket that goes around the outside edge to prevent scratching. Putting that gasket on was the hardest part of the install. What a bitch.

All in all i'm happy. Outside edge of the flare is just about even with the outside edge of my 285/70's. Hopefully this will take care of the debris getting kicked up on the paint. Here are some pics.
Before:

After:

Before:

After:

 

Installed a Qi charger.

I had a magnetic phone holder I had gotten off Etsy last year that clips over the molding like this one

https://www.etsy.com/listing/631496...-1-2&organic_search_click=1&frs=1&bes=1&col=1

Superglued the charger to it

$7 Super Glue Gel - 5 Mini Single Use Tubes

https://www.amazon.com/gp/product/B01C680N28/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8

PERFFIER Wireless Car Charger 15W Qi Fast Charger and Air Vent Phone Holder Auto Clamping Wireless Car Charger Mount Compatible for iPhone 12/11/XR, Samsung S20/S10, and Any QI Cell Phone(Black)

https://www.amazon.com/gp/product/B08NX2S5XP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8

And ran a cable up to it using Hondo Garage's clips

$9 UGREEN USB to USB C Cable 90 Degree USB C Fast Charging Cord Compatible with iPhone 16/16 Plus/16 Pro/16 Pro Max/15/Samsung Galaxy S10/S10+/Pixel 7/6a/LG G8/G7/Pixel/Switch, 3.3FT

https://www.amazon.com/gp/product/B07PHRPCSR/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8
https://shop-hondogarage.com/products/tacoma-phone-cord-clips

 

Had 4 Toyo Open Country AT3's mounted up...265/65/17XL's...we'll see if these outperform KO2's.

 

Got my fuel pump replaced this week and also upgraded my radio to something with carplay(pioneer nex 4660).

 

Does refinancing count? Dropped the interest rate from 3.99% to 1.88%.

 

Today, installed TRD Pro skid plate, raptor lights, and TRD grille emblem. I like it!

 

Those the Goodyear at tire?

 

Love the grill. Semper Fi!

 

Finally got around to installing a bed rack on top of a Diamondback Cover. Ordered a short bed version so I could still open it up. Unfortunately had to drill some new holes into it, but it should be alright.

 

Dropped the airdam, installed demon brackets and put on some d-ring shackles.