Custom Switch Panels

These?

 

The far right dummy plate. Or the whole thing, all 3.

 

Does anyone here have their take off dummy piece from over head panel?

I can pay you. Pls, it’s for an R&D project.

 

I've got these ones...

 

ok, @s7726 , I will buy em from you if you're willing to part with them. I think I could buy a switch blank and repurpose the piece and still use it for my project. PM-ing you.

 

Just installed an overhead console 3 switch panel. Fit like a glove.

https://youtu.be/ckLxnr1MAK0

 

@MESO I have a couple questions regarding the custom left side cubby. Do you know if you can get the Tekonsha and (1) button, either "B" size or "C" size on the top row and not have to trim any of the dashboard to get them to fit? Also, any idea when the next round will be opened up for sale?

 

Trimming will be required.

 

The trimming for the left side panel is super easy. All I did was pop out the factory panel and take a sharp razor blade to trim away what is showing in there. It took like 3 minutes and that’s with me being extra careful not to cut any harnesses.

Everything you’re trimming is covered by the panel, so if you screw up, you wouldn’t be able to see it once the panel is put back on.

 

Installed the lower switch panel about a week ago. The panel is well made and fits perfectly in the spot. The usual good quality parts from Meso.

https://youtu.be/VpELpmOJu9Y

 

Thought the flip fob was a bad wait but I have a compressor already waiting to install for one of these panels and it is somehow making the waiting worse. Should have jumped on it in January but didn’t know how I want to configure everything then.

 

Subd for updates.

need a SP 9100 cubby panel, 2016 no window switch. Like dis

 

I have one from SDHQ that I'm swapping for a Meso one -- interested in the SDHQ one?

 

Check vendors that sell his stuff, often times they have stock when his website doesn’t.

I recently got my switch pro panel from calirasiedoffroad

 

Yeah maybe. Switch cut outs like the photo I posted? Just want it as a spare, I saw the SDHQ one and that Caliraised has it too. Much $

I have one from Meso that I got a long time ago but somehow got the wrong switch cut outs and it doesn’t have the tall switch cutout that I want for red arc controller. Might go back to stock cubby as I’m not wild about the switch pro being tucked away down there anyhow.

 

Yeah, looks like this. I think I may have cut the far right lower opening a bit to fit the ML-ACR switch though.

 

Thanks , I’ll pass if it’s been modified. I have my Meso one, which has the wrong switch cut out, and like you I modified it to fit the tall switch for my red arc. Didn’t go very well so looking for replacement

 

Sounds good, just figured I'll letcha know. It's just going in the discard bin when I get around to swapping my switches out anyway.

 

Gratitude.

the solution for me is to prob relocate the switch pro switch plate. Might just throw it in a HONDO cell phone mount and see if I like it

 

How do you hook up a garage door opener and make it a button? I dont have homelink and would definitely do something like this.