Icon RXT leaf pack installation details

Hi all

Just finished up replacing my stock 4 pack toyota leaf that had a 2" block underneath it with a set of Icon RXTs, in stage 2 config. Really nice setup! Sits with just under an inch of rake now. I think my toyota leafs were possibly flat. A problem I no longer experience!

One thing I found odd was the lack of a threaded hole in the shackle for my ebrake cable guide. It seems the solution is to just use the bolt on the shackle itself to put that bracket in - but its a good 1/5"s higher than the original hole, maybe moreso due to the thickness of the leaf pack. Something to worry about since it is taking up a little cable slack - or no big deal?

Also, any other cables I should get extension brackets on? My shocks are bilstein 5160s, been on there for a bit, and I think I recall them coming with a brake line spacer which I did install.

Soon to get a U bolt flip kit and pair of superbumps to go with. Anything else I should check to make sure if I hit a big bump at max extension I don't bust something? Thanks!