A complete guide to fasteners?

Hey All,

I looked through the complete list of tools thread and thought it would be good to have the same kind of list all of the fasteners needed to put things back together or to replace broken, lost, etc. I need some guidance on some of my missing front bumper cover fasteners.

Its all of the different one-way and reusable clips that we all need as we work on these trucks. It would be nice to include pics & part numbers as well. If there is something already here, just direct me there pls.

I can start with these for my truck re-paint. For the fender flares;
Replaces OE# 75397-3501 ( PT Auto wear house CPA138-15)

$13 Dorman 700-671 Multi-Purpose Retainer, 25 Pack

Dorman 700-671


OEM#

$23 75659-04050 Rear Fender Molding Pad

75659-04050 (rear)
OEM#

$24 53853-04040 Wheel Opening Pad

53853-04040 (front) I ordered three so I can make two short ones for the front bumper end pieces)
Antenna mount OEM#

$12 86396-04040 Antenna Nut

86396-04040

 

All these fit my 2006 Tacoma

1. Rear mud guard to fender flare clips (3 per mud guard) - FBA21011-15, Clips and Fasteners


2. Fender flare clips blue and orange - C44-49X4, NWCLIPS


3. Fender liner grommet nut - 90189-06013 compatible, Rexka


4. Door panel retainer clips - 67771-30070 compatible, Clips and Fasteners


5. Small lower front fender flare slide clip - 75392-35220/75392-04010 compatible, Beler


6. Grill retainer clips - 9mm hole, uxcell


7. Front door triangle panel (behind side mirror)


8. Front door (one clip) textured 7mm clip - 90467-07211, Clipsand fasteners, Inc (also an exact match for Lexus engine shrouds and many other applications.



NOTE: As for the OP's post I purchased two 75659-0040's from Fred Haas Toyota. They fit the rear fender flare perfectly although I thought they were for the front. Of the two

$23 75659-04050 Rear Fender Molding Pad

75659-04050’s I purchased from Daytona Toyota one just fit the front flare exactly while the second fit the front as well as the small separate lower front flare after cutting the excess from the larger upper front flare. Kind of blew my mind and made me delete a couple of previous posts. Sorry!!!
That meant I had to purchase another molding either way. I just ordered the 04050 locally as well as one from Daytona just to see what the F*** was going on. I'll post an update upon receipt and install. Mean while I'm the one driving around Tampa with the three black flares and the right front flare missing! LOL

Update: the 75659-04050 I just picked up locally will cover both upper and lower front fender flares.

 

Nice update, thanx!!