Whatever

He'll dig for some pictures to see if we have any, but we had it mounted in here with velcro.

 

Maneater ?

 

So, random...


Story: like me, Bear's favorite place is out on the mtn, we were packed and running a few errands in Stitch when Danny calls saying he has to run back into work (think he has appraisals to sign-that time of year), so we have to delay a couple hours. I get back to house, pull in garage and that was Bear's disappointed "WTF is this crap" look.

 

A 60 year old millionaire runs into an old friend in a jewelry store and introduces his beautiful, 25 year old wife. As she goes back to her shopping the friend asks “You old dog. How did you land a young beauty like that?”
“I told her I was 80”

 

80 and harmless

 

This was the bottom of one of our moving boxes.

 

@Hobbs !!

 

"Man eater"?

 

Pump should be running soon. Priming some of the lines from when we had to drain them for winter.

lots of dirt and pollen sitting on the bottom and floating.

 

I ordered mine with the Toyota pigtail for an extra $10, so I didn't have to crimp anything but the ground.
It's $12 now:

$20 Tekonsha 3040 Trailer Brake Controller Custom Brake Wiring Harness for Vehicle & Brake Control Ends, No Cutting or Splicing Required

https://smile.amazon.com/gp/product/B004WLL0OI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8
Here's the controller: https://smile.amazon.com/gp/product/B000P17NXQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8

I looked for pics (which is how I found the pic of our hotsauce moving box up above), but didn't find any of the better of the two locations I had it.
Originally I attached it to the coin tray door to the left of the steering wheel because I wanted to leave the tray to the right open. I do not suggest this.

Spoiler: Although I do have a picture of the nonsense

I (after 1 towing trip with it like above) immediately moved it to the right of the steering wheel. I notched the back of the tray to not only make room for the wires to go through, but I made it large enough for the plug itself to go through it, so the face of the controller didn't stick out too much. Just used the

VELCRO Brand Industrial Strength Fasteners | Auto, RV, Boat Adhesive | Heavy Duty Strength for Dashboards & Consoles | Vinyl Compatible & Temperature Resistant | 2ft x 1½ inch Tape, Gray

Heavy Duty Velcro (hook side in the cubby, and loop on top of the controller) and made sure the glue cured for a while before putting the controller up.

 

Wrong Gif used @JaCado

 

Wish Candyman was still alive.

 

A tourist is backpacking through the highlands of Scotland, and he stops at a pub to get a drink. And the only people in there is a bartender and an old man nursing a beer. And he orders a pint, and they sit in silence for a while. And suddenly the old man turns to him and goes, "You see this bar? I built this bar with my bare hands from the finest wood in the county. Gave it more love and care than my own child. But do they call me MacGregor the bar builder? No." Points out the window. "You see that stone wall out there? I built that stone wall with my bare hands. Found every stone, placed them just so through the rain and the cold. But do they call me MacGregor the stone wall builder? No." Points out the window. "You see that pier on the lake out there? I built that pier with my bare hands. Drove the pilings against the tide of the sand, plank by plank. But do they call me MacGregor the pier builder? No...
But you fuck one goat ... "

 

he ate the old 86er and passed from the meat sweats
https://www.youtube.com/watch?v=q_215iQ7KDs

 

There may be a 12 Step program for this kind of thing.