What Have You Done To Your 3rd Gen Today?

I broke one of the clips you are talking about. Still goes back on with no wobble but I get what you mean. Stupid idea to have them in fake chrome to begin with. It HAS to cost more to make that shitty fake chrome plastic than just black plastic. They do it in hopes you’ll pay even more for a body matched trim kit upgrade.

 

Looks similar to the Southern Style Off-road slimline. But I believe it’s a different manufacturer doing the same type of setup.

 

Towing in Australia...

 

So I did the startup screen and display off image change. Is the startup image really that quick? And is there a way to stop the following warning or caution screen? Bought this mini Samsung usb that will blend in (plan on using for song library)

I have never used the screen off feature but think I’ll keep it on. Now I just need to take a killer shot of my truck and do a image swap

 

Also interested in removing that stupid warning screen....

 

Same!!!

 

Yes. Explore Overland, they are just outside of Utica, NY.

 

I don't know where you have been but I haven't seen your GIF in quite a while. I know i wouldn't have missed it...it is hard to stop watching!! Maybe I have been missing.

 

Damn that’s a good looking truck!

 

I purchased the Y adapter for the ECT/TRD pro harness also from tacomabob. I expect it this weekend. I very seldom look at the buttons on the left side of the steering wheel but noticed I have a blank spacer that will fill the void nicely. Only issue I have is reading others posts. Some put a USB plug on this side to charge phones. Decisions...decisions.

 

You don't have to break the 'alligator' clips or bumper tabs if you remove the bumper end assemblies. I used two 90 degree scribes to get under the clip on each end and they pull right off. Then you can install the clip on the new caps. Black caps are only $50 on eBay, half the price of those skinz....

just make sure you align the bumper ends before you tighten them down (bring them close to the body, there's a bit of room to align them)




https://www.ebay.com/itm/Rear-Bumpe...-Set-For-Toyota-Tacoma-2016-2020/284058636922

https://www.tacomaworld.com/threads/16-tacoma-bumper-cap-removal.404082/page-12#post-24904789

 

In House Fab is based in Queensland AUSTRALIA. I believe the snorkel is a similar copy to the Hilux N70 and N80 you see on the site. I am not sure about that, just my guess.

@JDSmith Sloop Motorsports sells the In House Fab here in the states. Through email conversation with Sloop I found out they are sold out here and could be another 6 months before they get any here in the states.

 

How long did you wait and did you get it on line? I paid a 100.00 to be on the list for when it comes in sept. Looks great and very solid...

 

I found the perfect setup to stop my hand sanitizer from clunking around in the door compartment. It’s been driving me nuts for the last year. I moved it to the center console molle panel.


A germ-X 8 oz. bottle fits perfectly in the OneTigris Single AR Mag Pouch. It also has Velcro on the outside for a patch.


Here’s the link for anyone interested:

OneTigris Single AR Mag Pouch...

OneTigris Single AR Mag Pouch Rifle Ammo Holster with Detachable Mag Sheath (Black)

https://www.amazon.com/dp/B07W5G2LCH?ref=ppx_pop_mob_ap_share

 

On my way to the dump hillbilly style after a little spring cleaning...

 

https://www.4wheelparts.com/p/2021-...mper-TC-19339/_/R-BKKM-TC-19339?ppcfon=1&gp=1

 

Thank you for your service!

 

Starting a water tank build inside the alucab- DIY 8020 alu cabinets begin next week

 

I used this. Works great. I use it between coats of Turtle Wax Ceramic Spray Coating.

 

This is what I ordered from Morris 4x4. I thought it was a good deal considering you get the light bar and shackles if you are looking for those items as well. However when I bought it was $718 + tax. Now it’s listed at $799 + tax
https://www.morris4x4center.com/bod...-with-20-led-light-bar-and-black-d-rings.html