Sold! Dynomax 39447 stainless 2-1/2" cat-back exhaust (NJ)

Sold!

I have a new

$341 Dynomax 39447 Exhaust System Kit for Toyota Tacoma

Dynomax 39447 stainless steel cat-back exhaust. It's 2-1/2" piping and comes with a welded Ultra Flo muffler. It's listed as 2005-2015 4.0 V6 Access Cab or Double Cab Tacoma but it can be used with the 2.7 if you elongate the holes in the intermediate pipe. I'm also including a short flanged 2-1/2" pipe with a 2 bolt flange and gasket that lines up with the 2.7 cat-pipe. I'm also including a 90 degree rubber hanger insulator for the tailpipe since the 12-15 exhaust is different from the 05-11. You could also bend the hanger on the tailpipe if you wanted to for the 12-15 trucks. I also painted the tailpipe and front section of the intermediate pipe with high temp clear just to help it stay nice a little longer. $225 Local pickup only in central NJ due to size.

 

I am interested. Going to look for some soundclips. Also local here in Hopewell township.

 

Avail still?

 

Yes, I still have the exhaust, intake, injectors and auto trans cooler setup.

 

bump

 

where in central jersey are you?? Im in north jersey and am thinking about buying this from you.

 

I'm in Ewing just north of Trenton off I295.

 

Hey Jeff, Do you still have those injectors?

 

Yes.

4 Flow matched Toyota 348cc fuel injectors for 2.7 (NJ) | Tacoma World

 

Can’t believe you’re still holding onto these thanks again for the scan gauge !

 

I've had a lot of people interested but nobody has showed up yet to buy the parts. I just put a 3" Dynomax/Cherry Bomb exhaust on my Silverado and it sounds great, a nice deep rumble. I do miss the Scangauge, I got a Diablosport I2 tuner for the Silverado but it takes several minutes for it to load up to be able to watch the different sensors, the Scangauge pops up right away for watching things like the fuel trims.

 

Awesome I’ll have to pass on that info to some friends with GM rides

 

The exhaust has been sold. I still have the injectors and intake.