1st Gen Lunchtable Thread - General Discussion

@JKO1998 @0xDEADBEEF @eon_blue I used Illustrator’s trace feature. I’m cutting your logo now Jaxon.

 

Actually I've pretty much kicked my reddit habbit. I'll scroll through the front page to see what the latest crisis is, but thats about it. Lots of good stuff on that site, but you have to filter through so much crap to get to it. That and they're pushing so hard to get people to install the mobile app, which is a hard no from me.

sooo..bring on the bad jokes

 

I remember you saying the turbo seals are on the wait out and couldn't handle the boost you wanted to push through it? But you put it back to stock and it was fine?


Is that all that's wrong with it?

 

Consider it done




I don't mind the mobile app... but then again I've always been off in the head and usually enjoy commercials lol and reddit mobile promotes more than any other site I've frequented

 

Oh they were both equally black lol

 

Turbo seals aren't the happiest but they're livable. Right now I have two stuck injectors, it runs so rich it dies. It's direct injected so 3000psi finds a way to leak by if the injectors aren't happy.

 

More like husband duties in this case, it's helped my wife's allergies a lot since we started using the better filters

 

I’m doing statics

 

Step 1) Convert everything to metric.

 

It appears the math is camouflage

 

you should see thermo

 

Meanwhile,

@JTFisherman can do this in his head

 

Allergies here as well. Plus with the kid and the fking wildfire smoke, yeah no. 16x25x4 filters here, I usually 2 pack the filtrete MERV 12 via Amazon. Might try the 3M though. @Sperrunner is right about the larger size filters. 12 month changes pfft, nope.

 

@Wulf The blade isn’t cutting hard enough, the image will peel off with the bleed.

Also, @JKO1998 :

 

The blade holder should have an adjustable depth. You will have to play with it to get it to cut well and it may change from one roll of vinyl to another even for the same brands.

You want to add depth but you do not want to be cutting too deep into the backing paper

 

It cuts perfectly for the Oracal black remanent it came with. This is a roll of Chinese Amazon stuff and it doesn’t cut all the way. I adjusted the weight of the cutter from 210g to 310g let’s see if it’s better

 

Lmao going from the chemical engineering classes to petroleum classes I swap units back and forth all the damn time. Almost everything but the specific petroleum classes is metric except statics and mechanics of materials.

I audibly laughed out loud when a petroleum teacher said nobody even uses the metric system in America and it is useless because I thought he was joking... he was not

 

Ugggggh that sound...I always press in all the folding pieces so the straw won't rub haha

 

I was talking about the statics part ha