1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

FS: 60% Rear Seat Delete w/ Fridge Slide

Discussion in '3rd Gen Tacoma Parts Marketplace (2016-2023)' started by mrjoshyman, Apr 24, 2021.

  1. Apr 24, 2021 at 9:43 AM
    #1
    mrjoshyman

    mrjoshyman [OP] Well-Known Member

    Joined:
    Dec 26, 2016
    Member:
    #205750
    Messages:
    202
    Gender:
    Male
    First Name:
    Josh
    VIDEO: https://vimeo.com/541068481
    Pix: https://postimg.cc/gallery/qqFnm51

    Custom built heavy duty 60% rear seat delete with fridge slide 32" of full extension.

    The fridge slide platform is 33 1/4" x 16 1/2". I strategically built in narrower so a wider fridge can fit centered on it with some overhang vs most fridge slides which are wider than the fridge and limit your ability to use a larger fridge in a rear seat due to limited door opening. I personally used this with a Dometic CFX 75DZW (shown in video)

    Includes all hardware to mount using existing bolt locations on tacoma. I also fabricated a secondary support to prevent any torquing of the platform when the fridge is at full extension.

    I will personally help you install this if picked up locally. Takes 15-20 minutes to get installed.

    This was in a 3rd gen, but should work in 2nd gen as well. Double cab only (not access cab).

    Price: $300

    Location: San Jose, CA
     
    BigRus75, wilderness4wd and thebaker like this.

Products Discussed in

To Top