Colorado Trading Post

Dope, what beer do you fancy?

 

Free line out converter.
Allows you to add rca outputs so you can run an amp and add a a sub to your stock headunit.

 

All good man, I don't drink it doesn't agree with my bloodline... Lol.
Thank you though.

 

Do you still have the center cap shown on the ground in the pic?

 

****spoken for****
2 bags of the glass beads/stones for a propane fire pit or fishbowl or whatever you can think of cause I know you enjoy arts and crafts.

 

Anyone have a bed mat for a 2nd gen long bed that I can trade you some beer to template? I'm in Arvada and need to get this done before June so no rush.

 

OEM spare tire off a 2021, 245/75/16. $100




Four OEM 2021 Sport 17" wheels and tires. Tires are 265/70/17 Cooper Discoverer ATs with about 1500 miles. TPMS will be removed before sale. $900

 

It's with quite a bit of sadness that I have to report that my Taco did not survive an accident a few weeks ago. Due to some needs and lifestyle changes, I'm looking to pick up a 4runner instead of a new Taco and need to sell a few Taco specific items to help fund the 4Runner. Sorry for the crappy pictures and I haven't had a chance to wash anything off yet. I just pulled them from the truck at Caliber Collision.

(Sold) $600 - RCI 12" bed rack for a TRDGen - https://rcimetalworks.com/product/05-19-tacoma-bed-rack/ - It's in very good shape. I have a couple of RCI's bike mounts that I would throw in as well as the mounting hardware for all.

(Sold)$800 - Tepui Kukenam Sky 3 RTT - This is a couple of years old but has only been deployed a handfull of times. It has a foam topper added on top of the standard matt that the tent came with. Looking for $800 for this.


(Spoken for) $600 - I also have brand new Warfab Abrams sliders for the TRDGen. They were on the truck for about 1300 miles and went off road in Utah once but never scraped on anything. No dents but there look to be a few spots where it could use a quick sand and refinish from install and from gravel being kicked up. They were $700 new without shipping. I finished with Rustoleum acid etching primer and painted them with Rustoleum pro bed liner.


(Spoken for) $50 - Husky all weather floor matts for the front seats only. These floor matts fit the floorboard very well and are still in like new condition. They were installed in late December. I think they were $80 or so. It was an xmas gift from the Mrs.

 

Id take those floor mats.

 

You got it! I'm currently transportation ally challenged but can work something out unless you are OK coming up to Westminster/Broomfield.

 

10-4. Ill pm you

 

Injen Cold Air Intake. Asking $250. Used for 3000 or so miles. Great shape. Includes ALL hardware and installation instructions. Loved the sound this gave the truck. Also legitimately noticed a low end throttle response. Selling because it doesn’t fit with the Magnusson Supercharger.

Pick up in Littleton area.

 

I will take the worm drive.

 

If bot doesn't want everything I'd take your levels.

 

you do know that you can't just cover up the stuff you intend to place them over don't you? If so just cut out the floor pan and install a floor drain - so much easier!

 

Practically there now

 

Are the bike mounts 15mm and does anyone want to TW express them closer to Denver?

 

Bump on some of this, added a few things as well:

Also got the following:

4-Drawer Kobalt toolbox *Drawers are unlocked, but no key*: $100
https://www.lowes.com/pd/Kobalt-33-...wer-Steel-Rolling-Tool-Cabinet-Black/50175965


ARB snatch strap, never used, 30' length, 2 3/8 width, 8000KG (17500LB) min breaking strength: $50

$70 ARB Snatch Strap 29 ft. x 2.3 in. - ARB705LB

https://www.4wheelparts.com/p/arb-snatch-strap-29-ft-x-2-3-in-arb705lb/_/R-BHWQ-ARB705LB


No frills Coleman cooler: $10