UTAH (and Surrounding Areas) BS Thread

Samesies!

 

What width?

 

Well it’s been done.



without Armor on

 

The absolute most confusing answer straight from the website.

• Off-road race-inspired 17-in. x 7-in. cast aluminum bronze wheel with 6 lug nut pattern
• 11-mm. with 4-mm. wheel offset widens the overall vehicle track width by 0.9-in (22 mm.) for more aggressive stance
• 
  hope that helps.

 

The width probably won’t work great with those 37’s. You’re putting a 12.5 on a 7in wide wheel.

 

Just so everyone knows. I’m 100% responsible for the rain this evening.

I decided to wash my truck yesterday, and of course it rains.

 

Thanks for the plug. Already nearing capacity for a 3 hr window.

 

Air is full of dust too... Now, if it will just rain again after you wash it again.

 

glad you beat me to it, I was planning to wash the truck today as well and didn't get around to it

 

It will. I’m batting 1000 so far.

 

They look good.

 

Tonight’s desert. It goes down smooth.

 

Can I come over?

 

If you have king or foxes, midnight 4x4 in slc has done mine before. They rebuilt my rear bypasses and sent them out for a zinc coating last year. Took like 2 months due to the start of the pandemic, but they sure look brand new!

 

I finally got something to hold a phone or tablet. Ill let you all know how it goes. Also found out that my 2011 is a 2nd gen and 2012-2015 is a 2.5 gen.

This mount does require removing your radio/ vent bezel in order to drill into it. So probably wouldn't recommend this if you don't plan on keeping your rig for the long term.

https://expeditionessentials.com/collections/frontpage


Little history on the truck, I ditched the stock double din back in 2013. I needed a spot to mount my S-pod switches. Since I have the 6-spd TRD offroad, all my dash locations were filled. The empty din below the radio housed my custom switch panel. I have since moved my switches to the head liner.

 

Absolutely.

 

+1 for Midnight 4x4.

I almost pulled the trigger on this. I was afraid it would rattle. How’d was your experience?

 

I will let you know. I am going to join some buddies next week in southern utah. Hopefully it doesn't rattle. It has six screws holding it to the vent/ stereo face. My truck rattles so much already! What is an extra rattle..

 

Going to the Swell?