***CLOSED***JD Fab LCA Pivot Group Buy

Well you guys asked and Harry/JD Fab is answering!!!

This group buy will be run from 5/14/'21-6/13/'21
The LCA pivots and the stock width UCAs for the LCA kit are what's available in this GB at this time.

JDFab is offering a group buy discount if we can get 20+ people interested. Discount will be shared with confirmed participants, DO NOT POST it publicly or share the code. This is a discount code used during ordering and will only be able to be used once. If you share the code, post, or try and use multiple times your discount will be disqualified.

The LCA Pivots are on the website: https://jdfabrication.com/collections/05-15-6-lug/products/tacoma-05-18-lower-arm-pivots

The Stock Width Caster correcting UCAs are also on the website. It is advised to use the .25" caster UCAs with this LCA pivot relocation for stock width trucks. There a few options so click the drop down menu: https://jdfabrication.com/collections/05-15-6-lug/products/tacoma-05-18-upper-arm

Designated thread on all the products and information on the LCA pivots as well as lots of BS, but you'll find lots of pertinent information and questions answered here: https://www.tacomaworld.com/threads/fitting-35’s-with-minimal-trimming-now-adding-long-travel-and-934-cv’s.626274/

Discount code will be sent out when we hit 20 participants, and then cleared to order. Ordering, production and shipping will be through JDfabrication. There is no max # of participants. I'll be sending PMs out to everyone who is participating with the code when we reach 20

Retail Pricing:
-LCA Pivot Kit with Skid: 999.99
-UCAs start at: 529.99

3rd Gen Fitment: LCA pivots are good to go for 3rd gen, the only difference is your alignment cam bolt diameter. Steering and LT: We'll have to get a truck in @81Trekker 's shop to confirm.

Seriously Interested Participants:

Sign up by replying to this thread. Don’t chicken out. You are either in or you aren’t. NO maybe, no waiting on the wife, gf or bf to get permission. If you are on the fence to see if it’ll go up to max discount before you jump in, you are HOLDING the group buy back. Don’t be that dude. If you are a maybe do not go in until you a definite yes by going in you are obligating yourself to this GB!

Disclaimer:
This kit also requires quite a bit of fab work, you will have to do some fitting, cutting, and welding it isn't for the faint of heart.

 

Participants:

1 @Trim taco LCA pivot
2 @Sixthelement LCA pivot & UCA
3 @buk LCA pivot
4 @Masshole_And_His_Taco LCA pivot & UCA
5 @Sharp Tacoma LCA pivot
6 @Vegasstunts UCA
7 @Urineovrurhead UCA
8 @savage1016 UCA
9 @Iggy LCA pivot
10 @ejwan UCA
11 @SUMOTNK UCA
12 @Mista_G LCA pivot & UCA
13 @zippsub9 UCA
14 @Cred92 UCA
15 @01 dhrracer LCA pivot
16 @marinemonkey LCA pivot
17 @TacoTuesday1 UCA
18 @JohnnyRook LCA pivot
19 @FlyinRyan893 LCA pivot
20 @xweslingx LCA pivot
21 @nudavinci64 LCA pivot
22 @TheBlueBeast15 LCA pivot
23 @BrewmasterBilly LCA pivot

 

Sign me up for the LCA pivot only pls.
3rd gen specific.

 

damn, would be up for it but about to drop $$$$ on a ring for Anna.

 

Can you confirm is this for a purchase of both LCA mounts and UCA or can we do one or the other?

 

The arms are for the guys who get the LCA kit. I'll double check.

 

@ovrlndkull
Do you have to use there UCA for the pivot kit?

 

I already have the upper arms.

 

You can use the OE ones. Other aftermarket ones with lots of caster built in isn't recc.

 

Well yes you can get just the LCA pivot the UCAs are offered for those that need them or want them with the kit.

 

ohb okay I have the Icon billet uppers
Would those work ok ?

 

@Darley_offroad You might be better off grabbing this deal than waiting 10 years for Marlin.

 

YES
For both.

 

I mean if you set the pivots to only .25" forward it would be okish. What you're loosing is actually pushing the front wheel forward. The leaned back of caster being added to other aftermarket UCAs puts the wheel actually back towards the cab.

You could sell those billet UCAs for more than the JDs

 

Hot damn. Just read all 278 pages of the thread this week and as soon as i finish reading it there's a group but for the first integral piece of the puzzle.

I'm down for a 3rd gen lca pivot set

 

You are seriously devoted to read the whole thread!

 

For the uninitiated. READ the steps and ask yourself if this is for you.

 

Curious about this too. I've been eyeballing his .75 UCAs.