RIght side DRL, turn signal and hazard not working

Bulbs and fuses are fine, rear lights are good as well. Can anyone help me out? If it's the wires and plug, is it an easy fix?

 

Do you have a voltmeter or a test light?

If so check the bulb socket for voltage when the lights are on. If there is proper voltage then you have a defective bulb or the lamp is not completely in the socket or the socket is defective.

Let us know what you have.

 

I had extra bulbs and tried them and none lit up.

 

Are you getting voltage at the bulb socket?

Yes or no or you don't know? You need to determine this before you go further.

There have been many that didn't plug in the bulb completely and then had your very same issue.

 

No voltage coming out of the socket

 

Do you know how the verify continuity? Verify from connector 1B on BECU (Cabin Fuse Box) to headlight turn bulb connector.
FTS_RH = Front Turn Signal_Right Hand
FTS_LH = " " " _Left Hand

 

Thank you, I will do that next

 

Thank you all for the responses, I fixed the problem. It was the socket that went bad, bought the socket from my local Toyota dealership for $10.