Ontario BS Thread

As it's a Polish company, I support that you continue to use them

Support my fellow countrymen!

 

That Censorship Tshirt is amazing

 

thank you!

 

A few possibilities:
He didn't do all the work so doesn't know - says the LCAs are at full caster when the cam bolt is clearly in the middle
He chose not to disclose all the work - coincidentally the fenderwell shot is out of focus.
He severely shimmed the bumpstops to limit uptravel.
His tires are hitting and he doesn't give AF - possible given the missing passenger side flare, crushed rockers and absence of sliders.

If a hypothetical 37x10.5" tire existed, I can see a cab mount relocate and pinch weld hammering being enough for street use. (Basically finding another inch of radial clearance on my setup.) A 37x12.5"? No way.

 

I bought door grip covers for my 2nd gen a few years ago: https://www.redlinegoods.com/Tacoma...rpulls/Toyota-Tacoma-2005-15-door-pull-covers

Very responsive customer service from the Maciej, owner of the company at the time - I took some measurements and they made a revised set of covers to fit better. I think I still have the envelope with the Gdynia address somewhere

 

That's where I bought the boot and arm rest covers. Had an issue with colour though. What was shown on the site was not what I received although they claimed it was. I didn't know they did the doors as well.

I don't see anything available for 3rd Gen though. I will inquire.

 

The part # is

$7 90404-51319 Toyota Genuine Parts - Union (90404-51319)

90404-51319 that is the larger diameter same as the threaded end on the breather. That way your 3/8 line will fit both ends!!

 

Yessir, 100% both sides.

 

@tacoma16 Heard you like welding


http://premierpowerwelder.com/shop/welding-systems/premier-power-welder-micro-system/

 

I am considering carrying rod, a helmet and jerry rigging some batteries if need be.

not ready and haven’t had the need for that yet. I swear to god if this is a jinx….

 

be sure to scavenge a microwave over to create a choke with the transformer, would be a bear to strike and maintain good arc without anything to smooth the current, and 7018 rod

 

I haven’t even looked into it yet as I’m hoping I don’t break too bad to need a welder. Definitely good to know though

 

Anyone here know if you can cash out a Google Play gift card to a bank account for the dollar value loaded on the card?

 

That’s gotta be out there with the 3 bears.

 

TW and TEC feeding the addiction one mod at a time.....

step 1. realize you have a problem
step 2. verbalize it and accept it
step 3. feed that addiction ........ wait it might be seek help....... no,no, its "feed the addiction".....

 

when you're still "chained to staying at home" due to "restrictions" so you try to figure out another camp set up


I might invest in a proper hammock set up...

anyone run hammocks? @vonclicas you mentioned something about it once didn't you?

 

I’ve got full set of hennessy hammock with rain fly and bug net etc. If you are interested message me, can sell for 1/2 they go. Used it 2 nights and then got myself swag.

 

that would depend on what one you have, i fit into the heavyweight class

 

Im interested if @Shveet is not

 

All you gotta do is add Bed Stiffeners. Maybe a night light in the Outlet if you gotta go full Howard Johnson.