Either trac or sloppy light is stuck on

Hi ok my first truck. I was at stop sign and a car was at the other stop sigh. I was turning left but didn’t see her there. So just did some scratches but I took in for alignment and my light for either trac it’s the one with a truck with tire marks behind it. Slippery maybe? Anyway got an alignment but also had to replace the swivel I think it’s called. It’s part of the hub. Well they forgot to check the light issue and about 45 my truck starts to shake. What could this be maybe balance or maybe that light is on cause seems like I have to push the pedal harder to get my truck to move. Also seems like it pulls to right. It was 1000 for alignment and the part for the hub any ideas???

 

If they had to replace the spindle, they probably should have replaced the tie rod as well?

As for the light? It could be a bad abs sensor or wiring. The shake could be a bad wheel? If it was the spindle they replaced there a chance it could have damaged the wheel.

My advice is - Take it back to the shop that “fixed” it.

 

Welcome to TW...A $1000 seems kinda high for whatever they might have done. If all your truck got was some scratches, I don’t see how any front end components would have been damaged.

 

Welcome to TacomaWorld

 

Welcome to TW!