2021 4Runner Pro Wheels Ready For Order

where did you purchase these?

 

@cammyfive

 

Thanks for tagging me! I picked up my truck yesterday and drove 100 feet to the Parts Department to pick up these wheels I ordered! Discount Tire is doing the tire install and mounting in a couple of days so I usually tip the installer well prior to him even putting a socket on the lug nut so he's extra careful so I'll be sure to tell him about this. If it is like many here have experienced - too tight and "stuck" - then I've already contacted a shop locally with a member on this forum about doing this grinding. I would like to avoid it just because but it is too snug for comfort I'll have him follow these steps! Thanks!

 

Install Day Update (6/1/21)....

I drove out to Discount Tire where I had ordered the Michelin LTX A/T2s last week. Before they even got started I tipped the installer $20 each to make sure they babied the wheels, I do this every time and haven't had a scratched wheel yet. Anyway.... The tech said the tires balanced perfectly and they turned the white lettering inside (thank goodness), but when they went to put them one the truck they ran into the issue that has been brought up in this thread - the hub ring is 1 - 2mm too tall for the wheels to sit totally flush. They looked super awesome when they had them on the hub, albeit not torqued down, but the fact that they don't fit totally flush is not an anomaly or part of a "bad batch". Thankfully, a member here is going to grind down the hub ring 1-2 mm so they fit perfectly tomorrow evening so in the meantime the wheels/tires looks super cool sitting in the bed of the truck! lol

 

Update - 6/2/21:

Thanks to @marinemonkey for using his skills and equipment to grind just a hair or so off of the rear hub ring (or whatever the proper name for it is) so that these new 2021 wheels would fully seat. A couple minutes per side and they went on like a glove. They are exactly the look I was going for and the Michelin LTX A/T2s ride great and fit my purposes perfectly. For reference they are P265/70/16 and no rubbing at all; I did a fully wheel locked turn in 1st gear and reverse to test it out.

 

Does anyone have measurements of the center caps? Curious if they fit my kmc wheels

 

Can anyone measure their center caps for me? Thanks guys!

 

Bump! I would appreciate the help. Thanks guys

 

What measurement exactly are you wanting from the center caps?

 

Just a picture of the Outside diameter (OD) measured with the cap still on the wheel

 

Give me a few minutes and I'll take a tape measure out when I take the dogs out this evening.

 

Thank you so much!

 

I tried to be as exact as I could with one hand but looks to be right at 3" and maybe a mm or two end to end.

 

Perfect! That’s all I need. Really appreciate it

 

Is everyone still having this problem with the rims on the 3rd gen Tacoma’s or was it just a bad batch of rims?

 

Post some pics of these mounted!

 

Never bothered since they’re not on a taco, but here Ya go!

 

Dang that truck is awesome

 

She’s got stories, she’s not perfect, but she’s awesome. Does what it’s intended to do perfectly

 

Just love the function and look of that long bed