3rd Gen DCLB With 33” Tires?

Anyone got photos of their DCLB 3rd Gen on 33” tires? I would like to see them.

 

Subd

 

You are literally asking for a picture of big foot!! Good luck!! JK lots here https://www.tacomaworld.com/threads/show-your-285-75-16-and-285-70-17.469963/

 

I know a guy (not personally) with a DCLB on 34s. this is asking for 33s so no pic for u.

jk. this guy has a nice truck in a dclb config
https://www.instagram.com/southeasterntacoma/?hl=en

 

Nope, no one has ever put 33's on a long bed.

 

Really?

 

That was a little something called sarcasm, Forrest.

 

Same.

 

285/70/17

 

285/70/17, so 32.7"

 

There's a massive thread about this. Search for 285s.

 

Instagram: @RIPEVOX, He's a DCLB running 33" tires.

 

Snortagram where all the cool kids are

 

Guess i aint cool

 

Me neither

 

What was your lift measurements to fit the 33s? I really dig your setup.

 

The big thing is to get the correct offset wheels after a lift. Mine is lifted 2.5" in front, 2" in back. The 285s fit perfectly with no modifications. Wheels are 17x8, zero offset.

 

Thanks for the quick response! I'm got the Elka 2.5 IFPs coming in this week that comes with 2.5" lift in front as factory setting and OME rear leaf springs for 2" in the back. I was looking at LBR Offroad on FB marketplace that offered out the door prices for 17" Method 318s 0 offset for $1800 with 265/70r17 or $2000 with 285/70r17, both Falken Wildpeak AT3W. Was debating whether or not I'd rub with the 285s, so this answers my question.

How about your spare? Were you able to fit a spare 17 with 285s underneath? Does it rub against the exhaust pipe does some people say? Thanks!

 

Im only running 265/75/16 (32) and I had to bash the crap out of the spare tire side brackets to get my spare to fit. Id imagin3 285 would be little more difficult.
Just run them anyway, and now you have a good excuse for a rear HC bumper with swing out