1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

DTRL driver side not working

Discussion in 'Lighting' started by Sam091990, Jun 5, 2021.

  1. Jun 5, 2021 at 1:06 AM
    #1
    Sam091990

    Sam091990 [OP] Well-Known Member

    Joined:
    Sep 7, 2019
    Member:
    #304543
    Messages:
    197
    First Name:
    Sam
    Vehicle:
    BLK '12 DCLB PreRunner TRD Sport V6
    Marsauto LEDs in license tag lights Marsauto LEDs in map lights Yorkim Red LEDs in High mount brake light Zevo LED in dome light (may change that, it is not too bright)
    I have a 2012 Tacoma Prerunner with Factory DTRL. I replaced the sockets cause they were burned and now I have this odd issue. I turn my truck on, both DTRLs work, but when I turn on my Headlights the driver side DTRL goes out but turn signal works fine. I looked at the passenger side and saw a green wire in the top and a yellow wire in the bottom of the plug but it is opposite on the driver side. Do I need to repin the wire to match on both sides?

    IMG_20210605_025318604.jpg IMG_20210605_025408232.jpg IMG_20210605_025654101.jpg IMG_20210605_025735273.jpg IMG_20210605_025741707.jpg IMG_20210605_025756876.jpg IMG_20210605_025809357.jpg

    Help would be most appreciated
    Sam
     
  2. Jun 5, 2021 at 10:45 AM
    #2
    caribe makaira

    caribe makaira Well-Known Member

    Joined:
    Feb 13, 2011
    Member:
    #51121
    Messages:
    11,724
    Gender:
    Male
    Caribbean, Puerto Rico
    Vehicle:
    05 PreRunner TRD Offroad AutoTrans
    Hood Struts, My version Fogs always ON, Map & Overhead Light Mod,
    upload_2021-6-5_13-43-36.jpgupload_2021-6-5_13-44-37.jpg
    The wire positions in this drawing is looking INTO the connector not from the wire side.
     

Products Discussed in

To Top