What Have You Done To Your 3rd Gen Today?

Anyone know if I can get 12V power from any of these wires in the overhead panel or if I can tap into any of them just to illuminate my cab switches. I’ve got my bed lights and garage door opener in it now but I want to throw my Baja rock lights that are on my roof rack to a switch on this panel. Haven’t looked too much into it but I know they only need 12v. TIA

 

Not positive, but I bet @kmorgan3 either makes or could make an illumination tap for that

 

The bed mats are worth whatever price you can get em for. Having used mine for a few years now I would have been willing to pay a little more than I did. They should come standard on these trucks.

 

Went to Home Depot and picked up some bonded 16ga 4-wire trailer wire and wrapped it in 5/8" 3:1 heat shrink from Amazon, tapped it into place with a dead blow hammer and a piece of cardboard.

https://www.homedepot.com/p/TowSmart-Bonded-Trailer-Wire-1432/206798846

$7 XHF UL Listed 5/8" 10Ft 3:1 Waterproof Heat Shrink Tubing Roll Marine Grade Adhesive Lined Heat Shrink Tube, Insulation Sealing Oil-Proof Wear-Resistant Black

https://www.amazon.com/dp/B0919H9XQD/ref=cm_sw_r_cp_api_glt_fabc_0W7924591XZNABQ27MJV?_encoding=UTF8

 

So these showed up at my door after Ieft for work. I've got some OEM door sills but I really like these @TUFSKINZ ones. Project for next week's days off.

 

RATS!! Thanks for posting though.

 

I know, that’s why i didn’t link it in the original post if I recall.

 

Can't believe I'm saying this, but that is one sexy looking UCA!!

 

I agree! I'd never seen then before, but once the guy brought these ones out and showed them to me, I couldn't leave the store with anything else. They're super overkill for my application, but I'm really stoked. There's a lot of little details in these things that make them really awesome. They even designed a small chamfer to the underside of the arms, which gives it even more clearance from the coil and reservoirs. Here they are on Element's website: https://www.elementhardparts.com/products/element-billet-uniball-heim-uca-toyota-tacoma-2005

 

I rolled my bed mat up to send it back. I still need to tape the bag up.

While I was in the garage I figured I should knock out the AC drain mod before the heat sets in for the day. Routing wasn't quite as straightforward as I thought it would be.

 

I’m waiting on the brown guy that brings me toys. An order from Home Depot is scheduled to arrive today. Milwaukee packout cases and bases. I’ll be installing the bases on the roof rack for some click and go storage up there.

 

I love those pack out cases from Milwaukee too. What's your setup going to look like?

 

What ever I need for the mission at hand. That’s why I went packout. Normally I’ll have 2 of the small cases up there. One with my roadside assistance stuff the other with recovery gear. I’m also planning a wind fairing in front of the boxes and keeping everything aft of the sunroof. Between the two packout bases will be a small waterproof box holding the relays for the rooftop lighting.

 

Looks dope dude I'm into it

 

Installed the Diode Dynamic SS3 Sport fogs yesterday. Look good and the light output is great.

 

Installed this morning some new Morimoto 16-21 Tacoma XB LED “sequential” Mirror Lights I purchased during their Memorial Day weekend sale.

I have been using the MESO customs smoke led mirror lights since late 2018. They work just fine and will be back-ups just in case.

If you watch the two videos I provided you shall see the difference between the two products.

Top is Morimoto and bottom is MESO customs for static reference:


MESO customs in action:
https://vimeo.com/559396546

Morimoto’s in action:
https://vimeo.com/559397415

 

KDMAX tune from Chris @wahoobie at his tuning event in Glen Allen, VA! This tune is awesome @PapaRee and @TWTaco! The truck is so much more responsive and fun to drive. Great job on this tune!

 

Thanks Dan glad to hear how happy you are with the tune and how much better your truck drives! Enjoy it Dan!

 

Installed @TMCmakes Wheel Deal

 

Added topline steps. Also got the first of many scratches in the bed loading up my brothers bike.