AC not working

hey guys in desperate need of help, so my 06 tacos ac decided to stop working. none of the wires/plugs are bad, it’s not the resistor because that’s brand new as is the blower motor the climate controls don’t work even on high and im kind of lost any ideas would be appreciated

 

So you have no blower or lights on the A/C controls or just no blower?

 

Was the problem the same before you replaced the resistor?
Does the green AC light come on at all?

Here is a diagram for me updated resistor. (If that the one you got)
https://www.tacomaworld.com/threads/wiring-resistor-for-ac-blower.677253/#post-23827997

 

no this recently happened, the problem is that on the climate control the left most plug which I assume is for changing the speed of the blower motor, The power and the ground wire were exposed without my knowing touched I heard a pop and now can’t figure out what fuse broke. I checked all the fuses with the meter as well they’re all good I’m not sure what else i should check

 

also I forgot to mention yes I did replace the plug, I cut off the exposed parts and spliced in a new plug

 

No blower i just replied with the issue in detail in post above

 

OP only start one thread on a topic.

I sent you an answer in this one: https://www.tacomaworld.com/threads/2006-tacoma-air-not-working.724472/

 

Thanks man.
I was looking into this.
Thankfully, you had me cover already. I missed OP’s other post.

 

sorry lol kinda new to tacomaworld, layouts a bit different than what im used to

 

It's all good, but too many threads and valuable information gets lost.

Maybe one of the mods will get rid of this one...