What Have You Done To Your 2nd Gen Tacoma Today?

Installed a high clearance rear over the weekend now I cant stop looking at it

 

Looks great. The taillight guards really compliment it.

 

Thank you! Those were compliments of @Ryan2103a

 

A couple of weeks ago I installed Sumo Springs, good product.
I spent part of yesterday and today installing Rockford Fosgate speakers, 1675. Nice improvement.

 

Just cleaned up areas on sliders that were showing surface rust .( dremel with wire cup) put some rusty metal primer on there . Next will be some plain old black Rustoleum.

 

I'd say 15 to 16 sounds not bad at all for almost a 34.

 

Installed my lift, Bilstein 6112 (4/4 setting), 5100 rear, Icon AAL

 

I am on 275/80R17 Goodyear MT-Rs and got 13.4 yesterday on a little day trip..

 

Nice rig.

 

Thanks

 

Very nice truck, JRY.

 

Welp, the needle didn't create enough pressure in the zerk for me to get the grease into the u-joints. So back to square one. Everyone keeps mentioning a 90* fitting they used to get to it, does someone have a link to one that works (or maybe some pictures of the modifications they had to make to make it work) to get to the front zerk of the front drive-shaft?

 

Cleaned all door jambs and rubber molding .
McGuires detail spraying jambs and Citrus cleaner on the molding. Pollen and all kinds of dirt in molding .
Lubed Uni- balls .

 

have you tried this?

$33 LockNLube Grease Gun Coupler locks onto Zerk fittings. Grease goes in, not on the machine. World's best-selling original locking grease coupler. Rated 10000 PSI. Long-lasting rebuildable tool.

https://www.amazon.com/LockNLube-fi...ockn,aps,164&sr=8-1-spons&smid=A3UPOD5O08GT8E

 

Changed front and rear diff fluid. Also installed Lexus front diff drain plug.

Tcase tomorrow

 

I got started on my install for long travel. Tore down one side, cleaned it up, and welded on uca gussets. Gave everything a nice coat of paint and will continue tomorrow.

 

Yes and it will not fit into the joint, hence why I'm asking for people who have actually done it to lend a hand.

Did that somehow work for you?

 

I plan on getting one. But with my normal tip, just need to push it on and hold it in there while you pump. Its awkward, but you can get it done

 

I just use a normal gun and have zero issues. The only hassle is having to remove the heat shield on the rear of the Tcase to get to the one on the front of the rear drive shaft. Impossible to get to with the shield on (I've tried many times out of laziness hahaha)

For the front zerk on the front shaft maybe try pushing it on harder? there's no real trick to it. My cheapo Lucas grease gun goes right on.

 

Got dirty