Spacers on 2019 TRD Offroad?

Hi everyone!
I'm considering putting wheel spacers on my 2019 TRD Offroad. I'm going to install the Toytec Boss 2.0 lift kit.
I'm keeping my tires the stock size, but putting aftermarket rims on as well. The rims are the Fuel Vector 16 in 7.5 with +1 offset.
I'm looking for a little wider stance, but do not want any rub. Not looking to cut... anything.
I'd appreciate any feedback on what size spacers or any spacers at all.
Thanks

 

How much poke do you want? Would it be an option use a wheel with like a -10 offset so you wouldn't need spacers?

 

Your new wheels are already going to push your tires out nearly an inch. If you went with a -6 or even a -10/-12 you'd be out even more. If you know you want the poke, and you haven't bought the wheels yet I'd consider looking at rims that will give you the look you want. Now is the time to do that.

 

I agree with the above, I have -10 wheels and I love that bit of poke. Looks amazing and not having to deal/worry about spacers is a win across the board.

 

Thanks for the reply. I already ordered the wheels. Maybe I should have asked this before ordering
Anyhow, in terms of poke, I'd just like a nice looking, wider stance. We do go off-roading (Colorado), but no rock crawling. I'm having the lift installed in the next week or so.

 

I would wait to install the new wheels and tires and see how you like the stance. My bet is that you are going to find the increased amount of poke acceptable. You can always install spacers later, but the common 1.25" setup is going to add A LOT of poke.

 

It might not be too late to contact the seller. Call, e-mail, at least try.

 

I think I will put the new wheels on and see if I like the stance. If I want more poke, you're right, I can always put the spacers on.
Thanks everyone!

 

Make sure to share pics when they're on!