What Have You Done To Your 3rd Gen Today?

Yes, the only way to make it work without drilling is to have the lock going through the corner tie down hole.

if you attach it to this area it will face the cooler diagonal in the bed. I did it this was at first because I was afraid to drill into the bed. It wasn’t ideal. Then I sucked it up and realized there are so many other holes drilled in the bed to begin with. An extra drain hole won’t hurt.

 

It’s not much but last week I painted the bolts and washers for my unistrut roof rack to match my colour scheme and finally got around to installing them. It’s all in the details!

 

Had this pro shift knob from meso for sometime now...finally installed it with the ect button relocate. Now I gotta find something for that other switch. Install was easy...just don't do get those forearms pumped at the gym so you can fish those connection from the boot.

 

Installed TRD accessories under the hood...like the look.

 

Installed the VSS system from cascadia 4x4. Now time to get 12v to the back of the truck.

 

I tried putting mine in the console and it wouldn't work. That would be the perfect place for it though! But I have the same report - easy to install and works as well as wired.

 

What about it didn't work? No connection or...?

 

How much lift do you have? I think your stance is about perfect.

 

Installed the Cali Raised 8 gang switch panel yesterday, super simple! Will make hooking up anything else in the future much easier.

 

I plugged it into the port in the console, nothing. No connection and no sign from the device that it was connected other than the red light on the top. I unplugged it, plugged it back in, same amount of nothing. I unplugged it and plugged it into the dash port and it instantly began its connection process. I took a phone charger cord out and plugged it into the port in the console then into my phone and nothing happened, it definitely wasn't charging my phone (truck was turned on). I'm interested if others have had the same issue with the console port.

 

The port in the console is power only - not data. The dash port is the only data port.

 

Gotcha. Can you charge your phone there? It isn't charging mine.

 

Garage door is what I did for the second button

 

I have the TRD Lift, 2in front and 1in rear

 

Threw some bumper shells on today

 

It should charge your phone.

 

Two things: Installed the builtnko trd pro grill and also hit 1k miles!

 

Put mine in yesterday. Finally back in stock.

 

Installed some demon brackets and shackles this weekend, and ordered a maxtrac spindle lift today

DIY Installing Demon Brackets on a 3rd Gen Tacoma - YouTube