1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

CV Axle installer

Discussion in 'Northern California' started by yaapp, Jun 22, 2021.

  1. Jun 22, 2021 at 8:11 AM
    #1
    yaapp

    yaapp [OP] Well-Known Member

    Joined:
    Feb 11, 2014
    Member:
    #122880
    Messages:
    463
    Gender:
    Male
    Bay Area, CA
    URD CAI front: Fox 2.5 w/ reservoir 700lbs coil Camburg UniBall Rear: 2.5 w/ reservoir
    Soooooooooo the outer boot driver side finally tore.

    I will be ordering from cvjremen and getting a needle bearing from ECGS.

    I am not in a position to do it on my own right now so I was looking at shops.

    A few shops are quoting 2.5 hours labor of just the axle replacements, what is your guys thoughts? Any recommendations on places to do this at?

    Thanks in advance

    Edit: I live in San Mateo
     
    Last edited: Jun 22, 2021
  2. Jun 22, 2021 at 9:44 AM
    #2
    AntMan408

    AntMan408 Well-Known Member

    Joined:
    Apr 11, 2017
    Member:
    #216013
    Messages:
    1,343
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2021 Toyota 4Runner off-road, 2022 Tacoma Offroad
    4runner: King Shocks Front/Rear SPC UCA’s SPC rear control arms Icon Rear Springs 52700 Icon Panhard Bar SCS 10’s RCI Skids and Sliders CBI Baja Bumper w/Diode dynamic lightbar RCI Roof Rack Tacoma: King Shocks Front/Rear Camburg UCA’s Deaver Expedition Stage 1 Leaf Pack SCS Gen 5 RCI Skids RCI Sliders BAMF Hybrid Bumper RCI Roof Rack
    If you scrolled down a little in this section you’d see two posts for Bay Area installers.
     
    kalieaire likes this.
  3. Jun 22, 2021 at 12:22 PM
    #3
    LRockPro

    LRockPro Well-Known Member

    Joined:
    Mar 13, 2021
    Member:
    #359206
    Messages:
    96
    Gender:
    Male
    Vehicle:
    LRock
    2.5 hours sounds about right for both axles.
     
  4. Jun 22, 2021 at 5:11 PM
    #4
    yaapp

    yaapp [OP] Well-Known Member

    Joined:
    Feb 11, 2014
    Member:
    #122880
    Messages:
    463
    Gender:
    Male
    Bay Area, CA
    URD CAI front: Fox 2.5 w/ reservoir 700lbs coil Camburg UniBall Rear: 2.5 w/ reservoir
    Mark isn't doing any fluid jobs

    Still waiting on Milo to respond...so yeah
     
  5. Jun 22, 2021 at 6:02 PM
    #5
    AntMan408

    AntMan408 Well-Known Member

    Joined:
    Apr 11, 2017
    Member:
    #216013
    Messages:
    1,343
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2021 Toyota 4Runner off-road, 2022 Tacoma Offroad
    4runner: King Shocks Front/Rear SPC UCA’s SPC rear control arms Icon Rear Springs 52700 Icon Panhard Bar SCS 10’s RCI Skids and Sliders CBI Baja Bumper w/Diode dynamic lightbar RCI Roof Rack Tacoma: King Shocks Front/Rear Camburg UCA’s Deaver Expedition Stage 1 Leaf Pack SCS Gen 5 RCI Skids RCI Sliders BAMF Hybrid Bumper RCI Roof Rack
    milos phone broke. Email him if you haven’t v
     

Products Discussed in

To Top