New tires and rims

Ive had just nitto grapplers before that were on my titan and they were a great tire so i figured id give the ridge grappler a try on the tacoma

 

Fox 2.0 performance coilovers? I have them and it only lifted my front end by like 1 inch after settling. Marketed as a 2 inch lift

 

No, the rim is the part of a wheel. When you had a bike and you bent a spoke, you didn't say you bent a rim. The rim is the outer part of the wheel. You can buy a 2 or 3 piece wheel and part of those pieces is the rim. It isn't lingo, it is incorrect identification.

If you did happen to get a wheel and a rim, it would look like this -

 

Consider. How often does a tire rub on the top of the wheel well???

Does the lift increase the width of the wheel well?

Tires will typically make contact with the cab mount, mudflap, front fender liner.........

Lift raises the truck body, it does not increase the width of the wheel well.

 

That's ony a 32" tire and half an inch narrower than stock. Should fit as-is no problems: https://www.tacomaworld.com/threads/largest-tacoma-tire-sizes-on-stock-suspension.67550/

What's your wheel offset? 0mm? +10mm? -10mm?

 

OP, Bet you’re glad you asked now aren’t you

 

They're only 255's. Try them on. Drive them around. you still got your old set in case you chicken out, right?

 

they fit

 

Look great!

 

Thank you

 

Any rubbing?

 

No, i turned wheels all the way in both directions and no rubbing

 

What about in reverse? Or slight flex? I was rubbing in reverse when I was running bigger tires

 

Nothing's wrong with a pavement princess. Looks great, love the nittos.

 

For sure! Mine is definitely that too haha

 

If you can pull off socks with sandals, you can do tires with no lift