Projector Headlight DRL help

First switch is DRL, which turns amber lights on only.

Second switch will turn on amber & U-bar lights on.


My question is, am I able to to make only the U-bar DRL without the amber & how would I do this?
To look like this:

 

Are you comfortable with accessing the Cab fuse box?
2 options:

1. De-pin a wire (lime green with red stripe (#5)) from connector T20 that attaches to the Turn/Hazard relay. Insulate with tape and secure from flopping around.
2. Cut the same wire, tape it up and secure it.

Now find the wire that powers the U led on each headlight. Select a IGN fused source in the cab, send wire to each headlight.
U_DRL when vehicle is ON.
No amber DRL.

 

Not too comfortable with it but Thank you, will give option 1 a try.

 

Or a overbuild type solution: