NorCal - The Pay it Forward Thread

Figure it's time for me to give back to TW even though it's probably not worth anything.

Toytec coilovers with about 90k miles and one shock is leaking, springs are 650lbs I believe.

 

aren’t these rebuildable?

 

I went to charge up my ADS and asked the guy if these are rebuildable. He says if it doesn't have a charge port then most likely not. But I'm sure you can probably source out a shock from bilstein

 

Interested! PM sent.

 

Free to a good home. If not gone in one month, it's going into the trash!

Thanks Shawn! See you soon!

 

Free for pickup in Fremont!

Rear alpine speakers with access cab buckets. Tweeters come with them.

Front speakers with retainers

Blaupunkt headunit with detachable face. CD player is behind face.

Window trims. The outter black covering is peeled on 3 of the 4. They can probably be salvaged if you clean it up and plastidip or paint them.

I'm going to dump them in a month if no one wants them.

 

WISH I WAS CLOSER!

 

Claimed and shipped to @Codolten

 

what do you want? Im in Fremont/Union City area, I can always snag something and haul it up on our next trip.

 

Fack it. Butt thank you

 

Free 1st Gen Tacoma Parts
All located in Sacramento:


E-locker pigtail


OEM UCA, 183K miles



OEM Calipers, 183K miles with near new pads



3/4” lift spacers

 

Just got a new soldering iron so if any body needs anything soldered like a wire harness for a stereo or something let me know. Will solder for free just supply the wires!

 

PM Sent

 

I'm giving away the parts I just replaced on my truck if anyone is interested.
Prefer picked up, I'm in Sacramento. Everything is still in my truck so if you're close maybe I'll deliver.
5100s with 885s. 5100s are 2 years old with 10k miles, 885s have 55k mikes.
Spring compressor, used once.
600# coil springs that came with my 6112s.
Original leaf springs 35k miles plus wheelers aal 10k miles.
Original uca 35k miles.
Original front brakes, rotors and dust shields 35k miles.
Thx, Mark

 

Here's the 600# springs from the 6112 Bilsteins

 

Can these 5100s be used on a first gen?

 

IDK

 

From what I can recall, I thought 95-04 were one design and 05-current are another

 

They’re different and won’t work. As you can see where they bolt up to the LCA. This was my very first set up.
1st gen 5100’s don’t have that skinny part between the eyelet & shock body like the newer 5100’s

 

Sounds like you could try it if you want