DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

New fronts are in. Since Dobinson doesn’t have their IMs rears out yet I’ll be running a set of Fox for now. I may sell the Icon fronts and rears without a rebuild.

 

Any of you lose some traction boards on I30 near Rockwall? I saw these laying on the shoulder so I circled back and scooped them up

 

Nice find!

 

Def from an overlander lol

 

I'm going to be a Grandpa!
And my daughter's having a BOY!

 

Congratulations, big milestone!

 

Congrats!

 

Congrats!

 

Congrats!!

 

Anyone near Allen have a hand held router and a 1/4" and/or 1/8" round over bit that I could borrow for like a day. Trying to build a keyboard tray for my new desk, and rather than a haphazard sanded off edge, figure a couple passes down it with a router bit would look a whole lot better.

 

I’ll report back soon

 

Who are you having do the install?

 

I may do it to save costs. I’ve had a lot of work on my truck lately and it’s getting expensive. I replaced all the TREs, retrofitted the Icon uniballs for delta joints, sway bar links etc back in October and the TREs are already going bad. Did the wheel bearings recently, and the needle bearing. I need to stop hemorrhaging money at some point...

TRB originally lifted my truck. I’ve had Tandem do my CMC. Stonebriar Auto in Frisco does my random stuff. I met Jake at Overland Expedition yesterday and may have him do it if I decide to be lazy. I’m looking for a front bumper replacement now.

 

My house is right by Jakes new shop, if you need help/tools I’d be happy to help.

 

Thanks Matt! I’ll give you a shout if I decide to sit in the garage and do it.

 

Afternoon gents. Just checking in since ive been MIA for awhile.

 

Been pretty quiet around here. Any new progress on the Camaro?

 

Sorta? We've been going through the motions to refinance the house and thats almost complete. That will let me get rolling on some things. Waiting on the roll cage and tubular front clip to come in (hoping in the next few weeks?). Then its getting towed up to OK to the chassis shop for install. Once its home I have a new wiring harness and new/restored interior pieces ready to go in. I was going to stage 1.0 it and run it for awhile then pull it back apart and refine it into 2.0. But since everythings been delayed i decided to just do it all at once. Right now im trying to decide if I want to paint/wrap it or just fix the sail panel and let it ride. Exterior is a 20 footer at the moment.

 

Stopped for the essentials.