1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Vibe after lift- need some info

Discussion in 'Suspension' started by infernoTaco423, Jul 11, 2021.

  1. Jul 11, 2021 at 6:01 PM
    #1
    infernoTaco423

    infernoTaco423 [OP] Well-Known Member

    Joined:
    Mar 4, 2019
    Member:
    #285385
    Messages:
    52
    Gender:
    Male
    Vehicle:
    17 TRD Sport
    Did the 5100 lift on middle perch with a 1” block in the back. Now when stopping I get a slight vibe from 2000-1500 rpms. Do I need a shim for the rear or is this the ECGS bearing. In my searches I can’t find a definitive answer.

    2017 DCSB

    thanks
     
    Last edited: Jul 11, 2021
  2. Jul 12, 2021 at 1:18 PM
    #2
    LC7

    LC7 Well-Known Member

    Joined:
    Mar 27, 2017
    Member:
    #214529
    Messages:
    458
    Gender:
    Male
    Far Nor Cal
    Vehicle:
    2011 MGM DCLB 4x4 4.0L
    5100's w/885's, SPC LR UCA, Deaver U402 stage 1 w/Fox 2.0 RR, 285/75r17 Toyo AT III load C on SCS F5, Dynabeads
    Eliminate possible issues to narrow it down. Engage 4H while driving at a speed below 50mph while the vibe is present.
    If the vibe goes away, it's the needle bearing. If it doesn't, it's something else. Report back.
     

Products Discussed in

To Top