Wheel bearing

What's a good replacement wheel bearing you guys are using?
Heard moog has gone to shit. I replaced both fronts last year with cheap autozone one thinking I was going to get rid of the truck soon. 1 has definitely gone bad

 

This guy right here: @05Taco4x4
https://www.tacomaworld.com/threads/wheel-bearings-hubs-press-service-4x4-prerunner.537080/

 

SKF or Koyo

Napa sells SKF under their house brand.

 

I’ve bought both from 05taco as well as this eBay listing since it uses koyo bearings. I got about 2 years out of the 05taco ones, which is good considering my wheel/tire combo weighs 110 lbs and has some poke. I only went with eBay this go around due to simplicity of ordering. Time will tell on longevity.

https://www.ebay.com/itm/05-20-Tacoma-4x4-complete-KOYO-Front-Wheel-bearing-assembly-/151286082490

 

I replaced both fronts last year with ones from @05Taco4x4. Transaction was easy, parts were good quality. Highly recommended.

 

I heard Moog is shit when it comes to LBJ. Now I'm paranoid. I usually have play and clicking that can't be felt with pliers on the balljoint.
So I shotgunned it and got all new ones.
And there might be some clicking again. I wouldn't be surprised if the Moog "heavy duty" I put in is a shit part that went bad after 2 weeks of use - because that's what everyone says they do
I was just dumb and didn't heed the warnings

hopefully their bearings are not as bad
OEM high quality bearings usually have brand names like FAG, SKF, Koyo, Timken, and so on.
They also cost more.

If sourcing new bearings and re-using the hub, I hope it is not hard. Usually bearings are a matter of using a press, with tools, onto the correct metal races. aka nothing special, is common/easy, and is not rocket science

Damn. That reminds me. I think my combo is around 80lbs.
55lb tire, 28lb wheel
I hope that doesn't stress the bearing. It' be cool if the engineers put an overbuilt heavy duty wheel bearing to handle truck use.
But they also designed a throwout bearing setup that breaks the transmission at 100k

 

Have 30K+ on the DuraGo bearing and hub, kit 29596058. They now sell the pieces pressed together, 29594446, that includes the bolts and seals. and only $25 more than the bearing/hub kit without the bolts and seals and not pressed in. They are holding up well thus far with several off-road trips in Nevada and Socal deserts.

 

I also have purchased through 05TACO on this forum. Pieces are high quality, price was right and everything showed up smoothly and fairly quickly.

 

I bought two also..did passenger side it was whining.when the driver side goes I’ll have it ready.