Shop Time w/T.W. Friends

I have the ice out, I'm just letting it sit on the counter because some more water is coming from somewhere.

And the fill tube is clear.

 

Picked up my wife's new 2021 Blueprint Blue Corolla LE. She's ecstatic.

 

Nice!

My son would probably kill for that. He's been building Corollas lately.

Also:

 

Let it thaw overnight it looks like it was overfilled because the cubes look small in the cube mold and the chunk of ice looks HUGE and blocking the water way

 

it is also looking more like that thermostat as well as that is a classic sign

 

Precisely what I told my wife about 10 minutes ago that I was planning on doing.

 

So a few weeks ago I blew out the grating on my trailer gate and pulled it off my trailer. I then found out that I get like 4 MPG better without the gate vs. having it stand 4ft in the air. So I decided to create a bifold gate and see how it goes. Unfortunately I have about 1" of warp from one end to the other across 5' lol.

I also added some angle reinforcement where my SxS and tractor blew out the mesh.

Good news is it open and extends, then shuts well so I guess if it works it's not stupid.

Right?

 

After I got the ice maker out, I took the front cover (12) off, expecting to see the gear in part 17:



but mine looks like this:

 

You need to pull the 4 screws and that comes apart the good thing is that’s a updated ice maker. IM 22 ?

 

That plug looking thing is the main power that’s where you can check voltage at the ice maker

 

i was on the third icemaker assembly on the last house we had when we sold... in 6 yrs living there

if you find a good fridge for $100...let me know

 

W10882923?

 

Three screws and a bolt later, I've found the culprit.

Bottom right connection to the heating element is cooked.

 

That is sweet! I need to do the same thing to my small trailer.

 

Like Drew said……

 

New one

 

I still need to grind the barbs off the mesh and prime and paint. About half way through this project I muttered to myself that I should just make some ramps and call it good. So once I get done "fixing" my gate, I'm going to make some ramps lol.

Realistically I should have just made a dirt ramp at my cabin to back the trailer up to and drive off. I still might do that too I guess.

I have some metal next to my garage and this is what happens...

 

Let me see what my cost is on that IM what’s the model number on that one?

 

Since we're on the subject...


@IPNPULZ I have a Samsung fridge RS2530BBP and was looking to get an ice tray assembly DA97-02058P. Those seem to be unavailable anymore, but I can get a DA97-02058L which looks similar in pictures. Do you know if that would that work or nah?