Drive shaft boot size

Does anyone know if the 2012 and the 14 have the same size drive shaft boot?
Mines ripped and found this part number on diff thread.
Wanted to check before I ordered.

https://www.northerndrivetrain.com/product/SPI-211932X.html

 

I doubt the driveshaft has changed from those two years.

 

I can’t imagine it changed and that should be fine, but totally a guess, never had to replace that boot. I am curious, how do you think it ripped?

 

I bought that same boot/clamp kit from Amazon:

$22 Spicer 211932X Boot Kit

https://www.amazon.com/gp/product/B00GAPEDVG?ie=UTF8

I have a 2012 regular cab with a one piece driveshaft. The main reason for buying it is to see if the clamps are the same size as OEM. I've greased the splines twice now and I won't be able to use the OEM clamps again so I bought this.

I have yet to see if the boot or clamps fit. Been working on more important truck stuff first.

 

The rip was my own stupidity
There was a cone on its side on the highwaythat i thought i could clear with my lift
It hit some thing under the truck
When i checked it bent the heat shield on the gas tank and broke one of the fasteners
I didn’t notice but the shield must have hit the boot
When greasing my drive shaft i found the rip
I ordered the boot listed above, will let ya know how it goes

 

Did the boot today
Pretty straight forward
One thing to remember is the splines on front of shaft only go in one way so the u joints line up
At first I couldn’t figure out how come the shaft wouldn’t go back in, then I realized its i had to line up u joints