Rock ring interest for TRD faux beadlocks

jpereira2 · Feb 14, 2020

greenEFSI said: ↑

I was working on a set similar to the omf style for our wheels, but I ran out of interest and access to a cutter. I still have the prototype set and the hardware I special ordered if you want it for testing. Just cover shipping + what I paid for the hardware ($30). The hardest part would be the backside, our lips are cut with a step that goes down into the rim. You would need to groove that into the beadlock ring, or make a smaller ring that drops in and makes the mount flush.

Click to expand...

that's pretty sweet! but i dropped it plus don't own the oem wheels

greenEFSI · Feb 14, 2020

@jpereira2 Oops didn't see this was an old thread lol! I guess the my offer is open to anyone then...

jpereira2 · Feb 14, 2020

greenEFSI said: ↑

@jpereira2 Oops didn't see this was an old thread lol! I guess the my offer is open to anyone then...
Click to expand...

no worries!

BeefyTacoSupreme · Feb 14, 2020

greenEFSI said: ↑

I was working on a set similar to the omf style for our wheels, but I ran out of interest and access to a cutter. I still have the prototype set and the hardware I special ordered if you want it for testing. Just cover shipping + what I paid for the hardware ($30). The hardest part would be the backside, our lips are cut with a step that goes down into the rim. You would need to groove that into the beadlock ring, or make a smaller ring that drops in and makes the mount flush.

Click to expand...

It's very tempting, but I just don't have the equipment to cut those prototypes down to replicas of the OEM style. I'm going to keep searching for the next couple months before I pull the trigger.

Thanks for the heads up, though!

Nimble9 · Feb 29, 2020

greenEFSI said: ↑

I was working on a set similar to the omf style for our wheels, but I ran out of interest and access to a cutter. I still have the prototype set and the hardware I special ordered if you want it for testing. Just cover shipping + what I paid for the hardware ($30). The hardest part would be the backside, our lips are cut with a step that goes down into the rim. You would need to groove that into the beadlock ring, or make a smaller ring that drops in and makes the mount flush.

Click to expand...

Pm’d!

Rainier · Jul 16, 2021

BUMP. looking for a OEM 16" beadlock ring if anyone is selling!

Log in or Sign up

Welcome to Tacoma World!

Rock ring interest for TRD faux beadlocks

Would you buy a set if produced?

Yes

No

#41
jpereira2 [OP] Well-Known Member

#42
greenEFSI TacoSupreme____

#43
jpereira2 [OP] Well-Known Member

#44
BeefyTacoSupreme Well-Known Member

#45
Nimble9 visit squareonecreations.com Vendor

#46
Rainier Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

Rock ring interest for TRD faux beadlocks

Would you buy a set if produced?

Yes

No

#41 jpereira2 [OP] Well-Known Member

#42 greenEFSI TacoSupreme____

#43 jpereira2 [OP] Well-Known Member

#44 BeefyTacoSupreme Well-Known Member

#45 Nimble9 visit squareonecreations.com Vendor

#46 Rainier Well-Known Member

Products Discussed in Entire Site Forum: Wheels & Tires Marketplace

#41
jpereira2 [OP] Well-Known Member

#42
greenEFSI TacoSupreme____

#43
jpereira2 [OP] Well-Known Member

#44
BeefyTacoSupreme Well-Known Member

#45
Nimble9 visit squareonecreations.com Vendor

#46
Rainier Well-Known Member

Products Discussed in