What Have You Done To Your 3rd Gen Today?

Went on my first wheeling trip this weekend. Tons of fun and I have a new appreciation for this trucks capabilities.

 

How did you mount/secure the frig?

 

I haven't yet. It doesn't move much with the bedrug and so far the bed has been fully loaded while using it. The fridge does have tie down spots on each handle for a strap.

 

Fiddle with suspension

 

Does the roof rack impact the moonroof in any way? I know it slides into the roof, so does the roof rack reduce the amount of air coming in when it's open, etc...

 

Butt lift, full size spare and tire basket.

 

Order CBI sliders for my DCLB last week of April, arrived today. Will install tonight.
ETA: Was sent the WRONG sliders. They sent ones for a short bed, not long bed. Invoice shows DCLB on order. Waiting on how and when this will be corrected..

 

Switched out the booties. Full leather with a blue stitch. The blue is very faint compared to the black. But I like it.

 

Looks good, how big of a pain was it?

 

W

Very easy. Redline goods . Com. The parking brake has an option for a new base that is highly recommended.

 

I missed that option. Had to feed the old support rod through the new boot. Served me right for shopping after midnight.
I also did the armrest cover. Much better than the rubbery OEM cover.

 

Where is this?

 

Added Firestone ride rite airbags- it looks like I already have 4leafs on back but couldn’t stand the “sag” with any gear in the bed. 15psi levels it out and perhaps even raises the back a bit — takes a bit of work to install but definitely seems like a good add on

 

I could be mistaken (I'm not OP), but that looks like it could be Hidden Falls Adventure Park near Marble Falls, TX

https://www.hiddenfallsadventurepark.com/

 

Sometimes I awake to emails that I’m like, oh dang, I ordered that. But yeah I can’t imagine threading that thing through. I’ve got some clazzios on order so i get an armrest with that one.

 

Thanks.

 

These airbags are a great save for the odd times you need to carry more than the leafs can handle. They do make the ride stiffer but do their job to support the load.

Just a suggestion --
You may notice the airbag getting over-extended and pulling up on the lower attachment point during articulation.
Removing the bottom attachment bolt and attaching these cradles will allow the bottom bottom of the airbag to move freely preventing any possible damage.

https://www.amazon.com/Daystar-designed-suspension-convoluted-KU09140BK

 

Did adding that bumper bring on a bunch of squeaks?

 

Theres not much of a difference, maybe a tad bit more noise with it open but its very very minor in comparison to all the other things. Some photos attached to help show clearances and what not..

 

None that I notice nor care about lol