What Have You Done To Your 3rd Gen Today?

Bilstein 6112 Strut & Spring + Rear

$455 B8 5100 Series Set of Front & Rear Shocks fits 2016-2023 Tacoma with 0-1" Rear Lift | Provides 0-1" Front Lift | Includes TrendsAuto Decal | 24-263108 24-186728

B8 5100
Bilstein B12 Springs Special Suspension Kit 53-291387 For 150-200 lbs additional front weight - Body Armor HiLine Bumper & 12k HF Apex Badlands Winch
Icon 1.5" Add a Leaf with Overload spring
Right now the Tires are 265/75/16 going to upgrade to BFG KO2 285/75/16

 

How did you perform this feat of magic?

 

I just installed this Odyssey AGM Group 65 in my 2017 with the Off Grid Engineering dual kit and it fit without issue. I wanted the expanded AH capacity to run my fridge while off-grid... it's only 6lbs heavier than the recommended group 35 battery on the OGE site.

 

Installed a DV8 rack and tested out a bunch of cheapo LED light bars for sides / front.


Cut the rear tips so I could retain the factor roof molding. Other than the cuts for the mount points this was really the only part that would be in the way of keeping the OEM molding.

Which light bar do you think looks best? Narrow
or double row thick

 

Both look good. If you want more stealth, go single, if more bold go double. I like the single personally.

 

Agreed.. Surprisingly the single is just as bright and has a warmer light to it which I prefer and I like the stealth hence the low profile rack to start with so I'm leaning toward the single.

 

2021 AG OR DC added side boards, sequential mirror signals to match the factory LED package, window tint, Gator bedcover and the Anytime Backup camera system with front camera.

 

Added the tri color badge to the grill

 

Damn, that's spendy!!!

 

Washed/waxed...10 min later rain.

 

Put one on my truck also and it adds 5hp

 

@dleriche is correct. This was at Hidden Falls. Very nice place, I look forward to going again.

 

Looks good and +1 for not saying “installed”

 

2nd mod from the weekend.
I really like this mod.. installed a DMM kit from @thetacogarage.com
ESR magnetic phone mount... has a 17mm back-end so I used a DMM 25 to 17mm ball adapter

 

Was the easiest thing ever. Took a hose clamp and 25" of heater hose. Thread is on this site for specifics but just went in through the wheel well and was done in 10 minutes.

 

I knew I should have gotten black instead of magnetic grey metallic. Every time I see a black one...

 

Pretty good time to sell and get a black one.

 

I used a steamer on the stickers until they could be pealed off. It left a little residue but that cleaned off with Goof Off and a terry cloth.

 

Got my Meso Custom map lights in the mail today!

 

You Keeping er stock? Got mine 1 day before you (chatted on some other thread). Added bed mat, bed lights, trd pro grill, blackout badges, sequential mirror markers, LED interior bulbs (meso ultimate dome), LED headlight bulbs, LED fogs, and just got it tinted. Oh, and ripped off the "spoiler" as soon as I got it home from the dealership.