Please Help - Cargo Divider Knob Part Number

nevermind, I see you had to change the whole rail system.

 

Yeah, I've thought of trying that before I make a decision one way or the other...

 

Actually, the rials are still there, just moved in some. I have a machine shop in town that can shorten the ends of the divider itself so it might fit between the narrowed rail opening.

 

Just did a test fitting. The slider mounts are on the rails, upside down, and there will be sufficient clearance to mount the divider once I get about an inch or so chopped off of each end. So, looks like I'll be able to keep that. Just have to get used to the mounting knobs being on the bottom, not the top!. Just will have to see about the bed rail cleats...

 

Try a local canopy or truck accessory store. I used a wing nut that was the same size. Cost less then 2 bucks. Doesn't look nearly as nice but hey whatever it works.

 

Toyota PT767-34070-HW

That is the part # for the hardware kit for the Tacoma Cargo Divider. Sells between $30 and $60.

 

I know this is a really old thread but a similar thing happened to me a couple weeks ago and I could not find an answer anywhere online or even through the dealership. I lost one entire side of my divider hardware to include the bracket, the M8 bolt which attaches the bracket to the divider, the wing screw and the female knobs, basically an entire assembly on one side. So the divider could no longer attach to the bed rail system on one side. I ended up buying the PT767-35200-HW kit from someone on Ebay and it came with 2 brackets, 2 knobs and 2 wing screws… no M8’s. Since I couldn’t find the appropriate M8 square bolt anywhere online, I went in to Ace Hardware and bought an M8 1.25 20mm Hex Bolt which worked perfectly! I hope this helps someone else.. I was desperately looking for weeks for a solution!