Which way does rear sway bar bolt up?

Hope I can get some help on this one.

I have an X Runner rear bar I want to install on my 2013 TRD Sport, and I'm not sure which way the sway bar bolts up. There is a bend in the middle of the bar, where the differential is. should the curve point up, or down?

Thanks in advance.

 

Google is your friend

https://www.google.ca/search?biw=13......0...1c.1.64.psy-ab..0.0.0....0.cUjQSUrRaak

 

Yes, that was the first thing I did. I'm seeing a lot of Hellwig and generic pictures of sway bars, but nothing from X Runners. I'm hoping someone who owns the OEM bar can give me a definitive answer.

 

Pics of bar . Try holding up or down . Bent up, might block diff plug .Think bent should go down .

 

This is an aftermarket bar from XII.

 

I got VII bar also on prerunner with TR drop kit . mines mounts like this .

 

Thanks everyone. I got a hold of the manufacturer, and he said the bend should point down, like the second picture. I appreciate all the replies.

 

I am not challenging the manufacturer on installation, but I went back and looked at several x-runners and they were all mounted with bend pointing up. The one I have was in the very first batch made, so I do not know if it was an early release or if the sway bar fits better inverted on dropped trucks.

 

I put the X-Runner rear sway bar on my 2014 4x2. One way looked right but blocks the differential drain plug, so I had to flip it over. I'm pretty sure I have the bend going up. I can look under my truck and let you know if you want