Is this factory or lifted

Need to replace my front shocks and springs . Can’t tell if this is lifted or not . Please help

 

Yep, looks like a slight hockey puck lift. What area you live in? Those UCAs and top hat bolts look like they've seen better days.

 

Lol, I live in Connecticut. Is there a special set I need . The isolated is all cracked and needs replacing to.

 

You may want to hit those bolts with some PB blaster or some WD40 before you try and break them loose. They look like they will be a bear to remove.

 

Lots of folks use KYB for the top hat bushings and rubber isolater above the spring. Pretty inexpensive and seem to perform well. Definitely a spacer lift on there.

 

Just have to determine if it’s 2 inch or 3 inch . Do I just measure the puck

 

I’ll be docking all those bolts with PB blaster for a day or 2

 

Bolts in that condition are best removed with a hot wrench, then replace with new bolts.

 

Soaking

 

Yes sir , I’m used to it here in New England . Rancho set up with the 2” lift or 3 not sure what size it is

 

looks like an old ass revtek 3" lift kit.

 

Looks like 3”. Measures 2.5 from the bottom of the rubber spacer to the top

 

Measure just the spacer.

 

Measures 2.5

 

Was gonna get the Ranch quick lift spring and shock kit looks good and good reviews