How to remove the blank caps next to the usb?

Trying to pop off the blank caps to hopefully route my wireless car play adapter in there vs having it sit on the center tray.

What is the easiest way to get the covers off?

 

Small thin pocket knife and wedge the blade through the top and bottom of the blank and wiggle it out slowly. I used a long zip tie to thread wires through from there so you don’t need to remove the console.

 

I used a butter knife my first time

 

I removed the radio, then just pushed the covers out from the back side.

 

What wireless CarPlay adapter are you using, and do you like it?

 

use a spudger. they are plastic so it shouldn't mar the console

 

Following as that was going to be my question.

 

Thanks for the responses, I’ll give it a shot tomorrow. The carplay adapter is this Vapeonly CarPlay Wireless Adapter Upgraded Wired to Wireless CarPlay Stereo Dongle Work for Factory Car Radio Honda/Audi/Volvo/Volkswagen,etc (Black) https://www.amazon.com/dp/B08SQCB76G?_encoding=UTF8

I actually paid $60 and it shows $37 now

 

https://www.amazon.com/dp/B08SQCB76G?_encoding=UTF8

I like it, 1/50 trips sometimes I have to reset it (unplug the dongle and plug it back) but its all good, no issues with music playing, steering wheel controls work fine, siri works good too.

 

Thanks for the info!

I feel like 1/50 times I have to do the same for the iPhone itself too, so that’s not bad.

 

I managed to accomplish what I wanted.
Used a chisel tip x-acto knife and popped it out, used a long zip tie to fish the cable and now its a little cleaner. Need access to the cable to reset if needed.

 

Nice. That looks pretty clean and you can just swap the blank out if you want to change it back.